☆ Bright and power: 40 inch LED Work Light Bar, Total of 120W at 6,500K Color Temperature, Warmer Color Temp: This 40 inch light bar features 6,500K , which means it is still crisp white light but a little bit warmer & easier on your eyes.
☆ Perfect Combo beam: excellent visual effect, spot beam for long distance illumination, flood beam for broad view area, This 40’’ light bar can be mounted in tight spaces, thus suiting a wide range of vehicles while maintaining factory look of the vehicles
☆ Waterproof and durable: This 40 inch LED bar with UV resin to deliver complete protection against dust and heavy washdown , powder protects aluminum housing from UV exposure & corrosion, anti-scratch PC lens and forged iron brackets are built to last
☆ Great Value for money: Our durable and adjustable aluminum housings makes changing directly of light beam easily , very Convenient flush mount plate to mount LED pod light on any flat surface, over-sized heat sinks and high-quality vent valve which keep the temperature down and effectively extend the lifespan over 50,000 hours.
☆ Easy installation & ADJUSTABLE MOUNTING BRACKET: With adjustable mounting bracket, the light bar can adjust to about 180 degrees, which makes changing direction of light beam easier. Mounting on the front bumper, bull bar, lower bumper opening, front the grill, hood, roof rack and rear step bumper at your preference, These Sleek, Light Bars offer enormous lighting power in a stylish, modern frame. Multiple options to mount your light wherever you need to.
☆ Compatible with automobiles and devices equipped with 10 to 30 Volt DC power source.It is perfect companion for different types of trucks, Jeep, SUV, ATV, UTV, Car, Boat, Motorcycles ,Off-road vehicles, 4x4,4WD, Golf Cart, Motorcycle dirt bike, Tractor, Trailer, Ford, Mower snowmobile, Passenger Car, Bus, Military,Mining,Boating,Farming, and Heavy Equipment etc,any indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Reverse Light, truck, trailer interior and exterior lighting , Off Road Lighting, Construction Lighting and so on. It Keep your dark night never dark and satisfy your Off-roads ambition.
Off Road Vehicle Lighting
The Led light can be widely applied to Jeep, 4x4, ATV, UTV, SUV, Truck, Car, Pick-up, Van, Camper, Road Buggy, Sand Rail, Train, Bus, Tank, etc. Super bright light beam dispels the darkness and lights up the forward road, clear your view for safe driving.
Boat Lighting
This Led light can be installed on boat, yacht, skiff, and freighter to enhance the brightness of voyage. With powder coat painting, the Led light is efficiently waterproof, dustproof and anti-corrosive.
Equipment Lighting
It is suitable for Trailer, Forklift, Excavator, Dozer, Road Roller, Crane, Tractor, Harvester, Grain Drill, Mower, Snowplow, Fire engine, Rescue Vehicle, Camping, Mining, Construction and other outdoor lighting. The bright light amazingly makes your view more clear, ensuring working safety at night.
Household Lighting
You can also use the Led light bar for household lighting such as Garden, Backyard, Garage, and Indoor Lighting. A brighter surrounding is very convenient for you to enjoy your fun time. (Note: Use a voltage transformer/converter to convert the AC 110-120V to DC 12V for indoor use).
1x 40 INCH Single Row LED Work Light Bar
1x Adjustable Mounting Brackets Screws Set
Installation:
1. Test the light to make sure it can work properly. (Red line is positive, black line is negative.)
2. Install the hex nuts on the bolts, And twist the spring meson .
3. Make the bolts go through the mounting holes And set into the spring meson, And then tighten the hex nut.
4. Connect the power line to the corresponding power connector.
5. Make sure the light is installed steadily, And then start the pow
Motorcycle Wiring Harness Kit ON/OFF Switch For LED Spot Light Fog Driving Lamp
7. Power Relay: 40A DC12V, Conversion circuit.protection of your equipment
8. Blade Fuse: 30A in-line blade fuse, blade fuse holder with a replaceable fuse Short-circuit protection.
9. ON-OFF SWITCH: Waterproof design,Red Backlight when turning the switch on.
10. Line Material: NYLON emits heat more efficiently,Flame-retardant material to manufacture,45inch wiring harness, long enought to fit variours vehicles
Nice look,comfortable touch,enjoyable using experience, Rust-proof,good flexibility,better wearing-resisting.
11. LED LAMP CONNECTION: HIGH TEMPERATURE AND MELTING RESISTANT, add connectors for safe connection.
12. 30A fuse with waterproof cap, protect the whole circuit from overheating and burnout,Max Wattage is 180W,
13. Suggestion: The power of line group is not more than 180W, short line is generally used for electric motorcycle, long line is used for heavy locomotive.
14. Red wire to positive pole and black wire to negative pole.
15. Switch Mount Size: 22mm 7/8" handlebar
16. To Fit Model: Motorcycle Motorbike
17. Switch material: Aluminum+Plastic
Wiring Harness:
45inch Universal Wiring Harness Kit - ONE Lead.
1 set of light connector to light fixtures; Operating Voltage: 12V DC.
Wire Gauge: 16 AWG; Max Wattage: 180W; Max Ampere: 30A.
on-off switch; DC 12V automotive relay, inline blade fuse with one extra fuse.
Note: Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
Switch:
The switch is very flexible for turning on or off. It can stand up to 30,000 times pressing under normal use.
Connector The connector can be pulled out, easy wiring and installation. It is also convenient for you to replace the wire of switch.
Universal Fit:
7/8" handlebar switch fits for most 12V motorcycles, bicycle, scooter, ATVs, snowmobiles, truck, tractor, etc. power source within 180W.