Model Comparison
|
|
12K Exquisite Details
The Photon Mono M5s is the 12K resolution of its 10.1-inch screen, achieving a 19-micron X accuracy,
with printing details as precise as a hair thickness.
|
|
Leveling-Free
A leap for printing success
A mechanical sensor on the cantilever arm detects the fit between the printing platform
and the floating leveling module and automatically adjusts it based on the detection results.
This eliminates the risk of leveling failure, improves printing success rate.
|
|
3X Faster
Photon Mono M5s is able to reach a 105mm/h* average printing speed.
It uses a high-speed release film able to lower the release force,
which ensures a high printing success rate while reducing the release height and increasing the lifting speed.
|
| Auto Device Check | Resin Detection | Prints Status Detection |
| Through multiple tests on the connectivity of the exposure screen, mechanical detection module, and motor operation status, it quickly detects and troubleshoots hardware problems, ensuring smooth and non-destructive connections to help achieve printing success. | The Photon Mono 5s in order to reduce printing failures caused by insufficient resin, the resin detection mode is preset to intelligently detect whether the amount of resin in the vat meets the printing requirements before printing. Minimizes print failures due to resin shortages. | The Mono 5s prints status detection function will provide reminders for common failures like bottoming-out printing, significantly reducing waste of resin and time. It can smartly analyze the causes of failures, and provides effective suggestions to ensure printing efficiency. |
|
|
|
|
Anycubic App
Popular sliced models/STLs available for you to experience 3D printing in just one touch.
Task viewing ensures your printing process in control.
 |
| Intelligent Mode | New Support Algorithm |
| In the new version of slicing software Anycubic Photon Workshop 3.1, the "Intelligent Mode" option can intelligently match exposure parameters according to model details and size, reduce the risk of printing failure caused by improper parameter settings. | New support algorithm further improves the printing stability and success rate, reduces damage to the model surface, makes it easy to remove supports and bottom valves. Comprehensively improve the speed of punching and slicing, making slicing easier. |
|
|
Models Display  |
|
Anycubic Photon Mono M5s
Tech Specs Machine Weight
19.6lb./ 8.9kg
Machine Dimensions
18.11x10.63x11.41in./
460*270*290mm(HWD) Printing Volume
190oz./ 5.4L
Printing Dimensions
7.87x8.58x4.84in./
200x218x123mm(HWD) Average Printing Speed
With high speed resin - 105mm/hr. or 4.13 in./hr.
With general resin - 70mm/hr. or 2.76 in./hr. Machine Leveling
Leveling-free
Light Source
LED matrix UV light source
Z Axis
Double liners with 10 μm
Resin Vat
Unibody design with scale lines
Exposure Screen
10.1" monochrome
12K(11,520 x 5,120px) resolution 480:1 contrast ratio 4.7 % light transmittance 2,000 hours typical lifespan Build Platform
Laser engraving aluminum alloy
Control Panel
4.3" TFT touch-control
Removable Cover
Effectively blocks UV radiation
Oversized Protection Film
Replaceable anti-scratch film
Power Supply
100W rated power
Data Input
USB Type-A 2.0, WIFI
|
In The Box
|
ANYCUBIC Photon Mono M5
  |
|
12K Exquisite Details
The Photon Mono M5 is the first to feature a 10.1-inch monochrome LCD screen with a resolution of 11520*5120, with a horizontal pixel size of 19 μm, which can offer printing details as precise as a hair thickness. The contrast ratio is 480:1, making the model's edges clear and well-defined.
|
|
Anycubic App
Popular sliced models/STLs available for you to experience 3D printing in just one touch.
Task viewing ensures your printing process in control.
|
|
Professional and Easy To Use
Using the laser-engraving process for the printing platform, allows the build plate to have a better flatness than the sandblasting platforms, which can effectively enhance the adhesion of the model, reduce the situation of the printing model falling off and warping, and greatly improve the printing success rate.
 |
|
Stable Operation With the Dual Linear Rails
Adopt a high-stability and precision dual linear rails lead screw Z axis, combined with a high-wear-resistant POM clearance nut, to ensure the precise operation of the Z-axis micron-level without shaking, effectively eliminating the layer grain and displaying the beauty of details.
 |
|
Anycubic Photon Mono M5
Tech Specs Machine Weight
19lb./8.6kg
Machine Dimensions
18.11x10.63x11.41in./
460*270*290mm(HWD) Printing Volume
190oz./5.4L
Printing Dimensions
7.87x8.58x4.84in./
200x218x123mm(HWD) Printing Speed
20-50mm/hr. or 0.78-1.97in./hr.
Machine Leveling
4-point manual leveling
Light Source
LED matrix UV light source
Z Axis
Double liners with 10 μm
Resin Vat
Unibody design with scale lines
Exposure Screen
10.1" monochrome
12K(11,520 x 5,120px) resolution 480:1 contrast ratio 4.7 % light transmittance 2,000 hours typical lifespan Build Platform
Laser engraving aluminum alloy
Control Panel
4.3" TFT touch-control
Removable Cover
Effectively blocks UV radiation
Oversized Protection Film
Replaceable anti-scratch film
Power Supply
100W rated power
Data Input
USB Type-A 2.0、WIFI
|
In The Box |
ANYCUBIC Wash and Cure 3
|
Larger Size for Upgraded Capacity
Compared to Anycubic Wash & Cure 2.0, the Anycubic Wash & Cure 3 has an impressive 100% increase in cleaning basket capacity, now at 3 liters.
The total volume of the cleaning bucket has been expanded to 4 liters.
This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.The curing size has increased by 15%,
up to 160*180 millimeters, to accommodate larger and more models for single post-processing session.
  Localized Strengthening, Uniform CuringThe "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments.  By adopting a brand new arrangement of light beads and lens light source, Anycubic Wash & Cure 3's curing uniformity has been enhanced by 20% compared to its predecessor 2.0. This results in a more thorough and comprehensive curing of the entire model.  Dual-layer Design, IPA SavingThe double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage.  Simple Operation, Quiet and EfficientCleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will.  Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced[1], creating a quieter and more comfortable working environment.  [1] Measured by Anycubic Laboratory the maximum sound < 65dB in the operating state of the machine. Models Display   In The Box  |
ANYCUBIC Wash and Cure 3 Plus
|
|
| Partial Enhanced
The innovative Flexicure gooseneck lights design increases the energy value by 30,000uW/cm² in the 1~3cm irradiation range, which greatly enhances the curing effect on details such as the top of the model and the figure's skirt.
|
Overall Curing
Adopting a brand-new arrangement of lamb beads combined with a lens
light source, it offers a 20% improvement in curing uniformity compared to wash&cure plus, thus 3d models can achieve better quality and consistency after curing.
|
ANYCUBIC Wash and Cure Max
  |
|
Larger Size, Higher Compatibility
Anycubic Wash & Cure Max can hold up to 14.9 liters (15.7 quarts.), surpassing the sizes of most wash and cure machines in the market. The impressive maximum cleaning size of 300*165*300mm (11.8"x6.5"x11.8"), is compatible with almost every consumer-grade resin 3D printer measuring 13.6"(35 cm) and below available on the market.  Powerful and Alcohol-Efficient
The adoption of two brand-new modes of spray rinsing and detail dipping ensures efficient and thorough cleaning.
Powerful mechanical injection eliminates residual resin on the 3d print surface,
while the bottom dipping rinse effectively removes resin from intricate details.
 Saving Isopropyl Alcohol4 liters (4.2 quarts.) of isopropyl alcohol is enough to clean large-sized models (10"/25 cm and up), saving over 50% compared to 8.5 liters (9 qts.) required by traditional washing and curing machines.  Alcohol-EfficientMoreover, one 5-liter (5.3 quarts.) bucket of isopropyl alcohol can clean up to 20 models (10"/25 cm and up), minimizing alcohol loss during a single wash[1].  Supports Large 3D ModelsSupports cleaning of models with build plate that the size is up to 12 inches (weight not exceeding 2.2 kg).  [1] The alcohol consumption for a single wash is less than 50 milliliters, according to data from Anycubic Laboratory. It is recommended to replace or filter the detergent after cleaning 20 models. One-click Washing and Curing
Complete Washing and Curing with a Dual-Function Button. Bid farewell to time-consuming and labor-intensive post-processing. Experience streamlined model processing that saves you time and effort.  360° Dimensional Curing
Featuring a 360° automatic rotating curing platform, this machine provides higher curing energy values[2] and longer irradiation distances,
enabling comprehensive, efficient curing for your models.
[2]Data obtained from Anycubic Laboratory and tested for curing energy values.  Artistic All-in-One Design
Anycubic Wash & Cure Max machine features an elegant pearl white body complemented by a sleek gray-toned cover, exuding a fresh and minimalist aesthetic. The convenient all-in-one flip cover design allows for easy opening and closing. The user-friendly control panel interface ensures a smooth and seamless operation experience.  Comprehensive Protection with Fault Detection
Intelligent fault detection and alerting to inform users when doors are not properly closed,
when water has entered the unit or outlets have become blocked during operation.
Promptly identifies and resolves faults to ensure seamless washing and curing operations.
 |
 |
