DC12V Brushless Water Pump/Oil Pump DC40F-1240
4m Max Height & 780L/H & DC1200mA
Key Advantages
- Brushless design and permanent magnetic rotor enable long life time with maintenance-free.
- The axis emploies static sealing instead of dynamic sealing to avoid leaking problems.
- Stator and circuit board sealed by epoxy resin. High performance ceramic shaft adopted.
- Amphibious design. Capable of submersible installation and entirely waterproof.
- Compact size with high efficiency, low consumption and low noise.
Maximum liquid temperature: 60°C, 172FDC40F SERIES
(Available Models)
Model NO. | Voltage (V) | Max Current (A) | Max Head(m) at zero flow | Max Flow(L/H) at zero head | Max Power (W) | Dimension of Inlet | Dimension of Outlet |
DC40F-1230 | 12 | 0.9 | 3 | 660 | 10.8 | 1/2" thread (M20mm) | 1/2" thread (M20mm) |
DC40F-1240 | 12 | 1.2 | 4 | 780 | 14.4 | 1/2" thread (M20mm) | 1/2" thread (M20mm) |
DC40F-1850 | 18 | 1.2 | 5 | 840 | 21.6 | 1/2" thread (M20mm) | 1/2" thread (M20mm) |
DC40F-2450 | 24 | 0.9 | 5 | 840 | 21.6 | 1/2" thread (M20mm) | 1/2" thread (M20mm) |
DC40F-2460 | 24 | 1.2 | 6 | 960 | 28.8 | 1/2" thread (M20mm) | 1/2" thread (M20mm) |
|
Frequently Asked Questions
• Does the Head mean I can use the pump to pump water up to the height directly?
No, the pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump (refer to the above Head-Flow Curve graph). the Head ead means when you connect a little hose on the output of pump, the max height of the pump can pump. If you do not connect a little hose on it, it can not pump water to the height in AD.
• Can I dry run the pump (run but not pumping water)?
No. Dry run will damage the pump and shorten its working life time.
Note
- This pump is centrifugal pump and cannot expel air automatically. For operation within liquid, it must be submersible installation. For outside liquid installation, make sure it is below the liquid surface.
- Please stop running if the pump is blocked and prevent any hard particles from entering the pump.