MHS5200A series Dual-channel Function Signal generator combines multiple functions in one, such as Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Sweep, Counter and Frequency Meter, etc. The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable, precise, pure and low distortion signals. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.
Features:
Using DDS direct digital synthesis technology to generate precise, stable, low distortion output signal.
CH1 and CH2 completely symmetrical two channels, each channel can be independently set the parameters.
Supports user-defined waveform, each arbitrary waveform memory depth 2048*12bits, 200MSa/s sampling rate.
With pulse trains burst output function，allow the unit to any output 1~1048575 arbitrary pulse trains.
Measurement functions: 60MHz frequency meter and counter function.
Signal output amplitude range is 5mVpp- 20Vpp, DC offset adjustment range is -120% to +120%, the resolution is 1%.
Digital signal output function, CMOS output range 0~10V.
Waveform generator up to 12 bits wide, the output waveform is more delicate, waveform distortion is low.
With full CNC functions, display and adjust of current output signal parameters, such as the amplitude, offset, frequency, duty cycle, and the phase difference of two signals.
After connected with computer, user can control signal generator functions and parameters, and can edit and download arbitrary waveform.
High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01Hz.
Tracking function: built-in frequency, amplitude, offset, duty cycle, waveform and other parameters follow function, easy to use.
Scanning features: frequency linear sweep and logarithmic sweep function, start and end points of scanning can be set freely.
Storage features: can store 16 groups parameters set by the user.
Operation: key operation, LCD1602 display in English, directly digital setting parameters or continuous adjustment knob.
Input over-voltage protection:DC5V power supply, insert more than 5V voltage will not damage the machine
Output short-circuit protection: all signal output can work above 60s in load short-circuit situation
Specifications:
Sine frequency range: 0~25MHz
Square frequency range: 0~6 MHz
Triangle frequency range: 0~6MHz
Pulse frequency range: 0~6 MHz
TTL digital frequency range: 0~6 MHz
Arbitrary wave frequency range: 0~6 MHz
Key Features
Waveform Types : Sine/Triangle/Square/Lifting Sawtooth Wave, CMOS Digital Signal Wave and Arbitrary Waveform
Waveform Length: 2048Points
Sampling Rate: 200MSa/s
Waveform Amplitude Resolution : 12 Bits
The Min. Frequency Resolution : 10mHz
Frequency Error: +/-5*10^(-6)
Frequency Stability : +/-1*10^(-6)
Amplitude Range(Peak to Peak) : 5mVp-p~20Vp-p
Output Impedance : 50Ω(+/-10%)
Amplitude Resolution : 1mVp-p (-20dB Attenuation), 10mVp-p (No Attenuation)
Offset Range: -120%~120% (The ratio of bias voltage and signal amplitude)
Bias Resolution : 1%
Phase Range : 0~359°
Phase Resolution: 1°
Output Modulation: Frequency Sweep
Sine Wave
Harmonic Arrived System: 40dBc(<1MHz); 35dBc(1MHz~20MHz)
Distortion: <0.8%(20Hz~20KHz)
Square Wave
Lifting Along Time: ≤20ns
Overshoot: ≤10%
Duty Cycle Adjustment Range: 0%~99.9%
TTL
Lifting Along Time： ≤20ns
Low Level ： <0.3V
High Level : 1V~10V
Arbitrary Waveform
Quantity : 16
Memory Depth/Group : 1KB/16
Scan
Scan Mode: Linear Sweep, Log Sweep
Scan Time: 1s-999s
Scan Range It is determined by the sweep parameter setting
External Measurements
Frequency Measuring Range
GATE-TIME=10S 0.1Hz - 60MHz
GATE-TIME=1S 1Hz - 60MHz
GATE-TIME=0.1S 10Hz - 60MHz
GATE-TIME=0.01S 100Hz - 60MHz
Input Voltage Range: 2Vp-p~20Vp-p
Counting Range 0~4294967295
Counting Manually
Positive and Negative Pulse Width Measurement 10ns Resolution, the Max. Measurable 10s
Periodic Measurement 20ns Resolution, the Max. Measurable 20s
Duty Cycle Measurement 0.1% Resolution, Measuring Range from 0.1%~99.9
Source Selection 1. Ext. IN Input(AC Signal) ; 2. TTL-IN Input(Digital Signal)
Memory Quantity 10
Location M0~M9
Interface Interface Mode using USB to Serial Interface
Communication Rate 57600bps
Protocol Using the Command Line, the Agreement Public
Power Supply DC MHS5200A DC 5V Power Supply
General
Size 19.5 * 17.5 * 7cm / 7.67 * 6.9 * 2.75in
Weight 542g / 19.12oz
Package Size 24 * 21 * 9.5cm / 9.45 * 8.3 * 3.74in (L * W * H)
Package Weight 986g / 34.78o
Package Included:
1 * Signal Source Generator
1 * USB Cable
1 * TTL Expansion Board
2 * BNC Clips Cable
 |  |
 |  |
 |  |
