Before
purchasing any wheel spacers please measure the gap between the outer
edge of the tyre and the wheel arch. Take 5mm from this figure to help
give the maximum thickness wheel spacer suitable for your vehicle. It is
good practice to work to 5cm less than this figure to allow for
movement in the vehicle suspension. When measuring your wheel gap always
measure both the driver and passenger sides on the same axle as
measurments may differ slightly and you should always work off the
smaller of the two figures. This is especially important as spacers
which have been fitted and / or tested cannot be returned.
Complete Installation Kit:
This kit comes with everything you need for a full installation!
Set of 2 High Quality Billet Aluminum Wheel Spacers
Full set of machine pressed studs and nuts
Bolt Pattern: 5x100
Thread Pitch: M12x1.25
Thickness: 25mm
Hub bore: 56.1mm
Includes Studs and Nuts
All of our spacers are made out of 6061-T6 Billet Aluminum
PCD: PCD stands for 'Pitch Circle Diameter' and is usually expressed in millimeters, (inches may also be used). For a 4 or 6 bolt fitment this measurment is the distance between the centre of two diametrically opposite bolt holes. For 5 bolt fitments measuring the diameter of an imaginary circle running through the centre of each bolt hole.
Offset: The offset of a vehicle's wheels is the distance between the centerline of the wheel and the plane of the hub-mounting surface. This is typically expressed in millimetres and can be either positive / negative. The offset plays a significant role in the vehicle's suspension geometry as well as dictating the distance between the tyre and suspension. Not to mention the visual gap between the wheel and the vehicle bodywork.
Stud Pattern: The stud / bolt pattern refers to the number of studs, (or lugs) the wheel bolts onto, and the imaginary circle the studs form. Most vehicles have either 4, 5 or 6 bolt patterns.
Centre Bore: The centre bore (or hub diameter) of a rim refers to the size of the centre hole in the middle of the wheel. This correlates to the diameter of the hub centre bore and is usually expressed in millimetres.
Hub Centric: Hub centric refers to the the the point at which the primary load of the vehicle is placed. Hub centric wheel spacers ensure less load is placed on wheel bearings and other suspension components by keeping this load on the vehicle hub. The alternative is to us 'lug centric' spacers which rely on the wheel studs to centre the wheel on the hub. Good practice for fitting spacers of thicknesses greater than 10mm is to use hub centric wheel spacers.
Compatible vehicles:
SUBARU
BAJA 02-07
IMPREZA 92-19
IMPREZA WRX 92-11
IMPREZA WRX STI 92-04
IMPREZA ANESIS 08-11
IMPREZA XV 10-12
IMPREZA G4 11-19
IMPREZA SPORT 11-19
FORESTER 97-19
LEGACY 89-14
SAAB
9 2X AWD 05-06
1-day handling time & At least 1 year warranty & Fast Local Delivery
Factory Price & Good After-sales service & Easy Return