You need to go to your local dealer or Locksmith shop to cut the key and program to your car, Lock smith should charge less than Dealer.

Basically if your current remote looks the same it will work

Product Specification:

Button: 4 button

Blade: without

Frequency: 304Mhz

Features:

1. The selling item is a DIY remote key.

2. The remote key includes key housing, circuit board, battery and chip.

3. You'll need to program the key and cut the blade at local automotive locksmith before using.

Fits:

For Falcon AU Series 2

For Falcon AU Series 3

For Fairmont AU Series 2

For Fairmont AU Series 3

For Fairlane AU Series 2

For Fairlane AU Series 2

For AU XR6 Models Series 2 & 3

For AU XR8 Models Series 2 & 3

For AU FPV Models Series 2 & 3

Descriptions:

*Perfect aftermarket replacement

*This is a remote with electronics and battery .

*The unit you will receive will be as pictured.

*The use and function will be the same as the original unit.

*If you have any additional questions, please send eBay message to us.

Program Instructions:

Sit in the car with the doors closed

Turn the ignition to the ACC position and within 5 seconds press the rear demist button 3 times (Note this bit must be done all within 5 seconds from when key turn)

You then press a button on the first remote to be trained , the door locks will cycle.

Then press a button on the 2nd to be trained and the door locks will cycle again.

Repeat this step for the the rest of the remotes to be trained to the car.

The first keypad trained will result in one door lock cycle, the second will result in 2 door lock cycles, and so on.

There is a limit of 8 remotes per car.

Turn the ignition to the OFF position to exit the learning mode.

Your remotes are now programmed to your car.

Now if doesn't still work try same procedure again though this time lock doors before starting

Package Included:

1x Remote key fob