1. Will prevent damage to vehicles.

2. The sheets are dimensionally stable, but can be easily adapted and deformed to a curvature or unevenness.

3. Manufactured from high quality aluminum sheet, cold formed, the embossing provides extra strength like the original sheet.

4. You will also receive 5 zinc-plated steel star locking washers(also known as underbody clips)which provide the stainless steel washers with a secure fit.

5. Repair your existing heat shield without taking it off the vehicle. Minimal tools are required to carry out this fix, you can even do it on your driveway at home.

6. Heat shield fittings can easily fail due to corrosion. Rust and corrosion can cause your exhaust heat shield to come loose around the original fixings. This can cause unwanted rattling, dragging or scraping from underneath the vehicle.

7. Before our repair kit, the solution would be to replace the heatshield, however this can be costly and time-consuming(sometimes the exhaust will need to be removed to carry out this repair). Not forgetting that the fault will only happen again further down the line.

8. Our universal heat shield repair kit comprises of 5 aluminium heat shield washers which are 52mm in diameter, covering the areas of the heat shield that has come away from the original fixings. They are made from the same material that most heat shields are manufactured from and can be moulded in shape to bend to your original heat shield.(if required)

9. Repair kit for repairing defective heat shields, the ideal solution for professionally and safely reattaching rusted through or torn connections. Preventive in the event of contact corrosion, as the original sheet metal no longer has direct contact with the sheet metal nut/spring nut thanks to the specially developed repair sheets.

Specification:

Condition: 100% Brand New

Material: Aluminium(heat shield washers), Zinc-plated Steel(star locking washers)

Color: Silver

Fitment Type: Direct Replacement

Placement on Vehicle: Lower

Manufacturer Part Number: N90335004

Fitment:

Can be used universally in common cars and commercial vehicles - underbody heat shields, noise insulations, bulk heads etc.

Please kindly check our item description, photos and sizes, make sure this item fit for your car before place an order.

Packing Included:

5 x Aluminium heat shield washers

5 x Zinc-plated steel star locking washers

Symptoms Of A Failed Exhaust Heat Shield Mount May Include But Are Not Limited To:

Rattling exhaust when travelling upwards of 20mph.

Strong rattling when using throttle.

Dragging or scraping noise coming from heat shield hanging off.

Hanging or loose fitted heat-shield visible from underside of car.

Notes:

1. All dimensions are measured by hand, there may be small deviations.

2. No installation instruction included, professional installation is highly recommended.

3. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.