THE ULTIMATE 2 IN 1 ENGINE HEAD GASKET 

REPAIR AND PROTECT SOLUTION 

500ML


GASKETGUARD™ is a high strength gasket repair and protection formula using the latest nanotechnology and developed in the UK to detect and permanently seal the damage in your head gasket. GASKETGUARD™ will permanently seal your blown gasket or cracked head and then protect your engine from future head gasket failure in 3 simple steps. It’s a green, liquid formula that permanently seals a crack in the damaged head gasket, saving you from unnecessary high repair costs and adding a new lease of life to your worn vehicle. Once fixed, GASKETGUARD™ 2 in1 formula will then continue to actively protect your vulnerable head gasket from future damage and also provide a protecting film over other vital seals and gaskets to extend their life.




USE TO PREVENT, REPAIR & PROTECT...


HEAD GASKET DAMAGE

OVERHEATING ISSUES
CO2 GASES IN COOLANT
WARPED ENGINE BLOCK/HEAD
WHITE SMOKE FROM EXHAUST

UNEXPLAINED COOLANT LOSS

BROWN SLUDGE IN COOLANT SYSTEM



GASKETGUARD™ is compatible with...
  • All Metal Components
  • All Seal & Gasket Materials
  • All Coolant Anti-freeze Types
  • All Watercooled Petrol & Diesel Engines


How to use GASKETGUARD™


3 Simple steps to permanently fix...


 1. Pour in GASKETGUARD™

Make sure the engine is cold and the coolant in the cooling system is clean. Remove the radiator cap and pour the complete bottle of GASKETGUARD™ directly into the radiator. Screw the cap back on. 


Tip: In vehicles without a radiator cap, GASKETGUARD™ can be poured in via the expansion tank and then squeeze coolant hoses until mixed.


 2. START THE ENGINE

If the vehicle is roadworthy: Start the engine and drive at a calm and constant speed for 5 to 10 miles, maintaining between 3,000 - 4,000 RPM for petrol or 1,500 - 2,500 RPM for diesel, then shut off the engine.


If the vehicle is not roadworthy: Turn the interior heater and fan to maximum. Start engine, run to operating temperature and then run on high idle (1,000 - 1,500 RPM) for 30 minutes.Turn off the vehicle and allow it to cool down completely.


IMPORTANT: Monitor the temperature throughout the application (see engine temp gauge on dash) and if at any point it threatens to overheat, shut it down immediately!


 3. Drive Away 

If necessary, top up with fresh coolant up to the specified mark on the coolant reservoir. 



Aftercare

Simply leave GASKETGUARD™ in the cooling system and continue driving your vehicle as usual. Once fixed, our formula will protect your head gasket! Keep GASKETGUARD™ in the coolant system to protect your head gasket from new future damage. For engines with severely worn head gaskets, it is recommended to add half a bottle of GASKETGUARD™ ‘twice a year’ when you change your seasonal coolant.



How many bottles do I require for my engine size?

up to 2.5L = 1 bottle

2.5L to 4L = 2 bottles

over 4L = 3 bottles



GASKETGUARD™ Lifetime Guarantee

Once fixed, we back our permanent seal with a Lifetime Guarantee. If the seal starts to fail at any point, we will send you another bottle free of charge!