LAUNCH X431 CRE Scan Tool fit for Ford: One - Click Lifetime Free Update Via Wifi (For More Features, Newer Vehicles, Better Performance)

Why do Ford/Lincoln/Mercury/Mazda Car Owners must have a LAUNCH X431 ELITE Fit For Ford OBD2 Scanner?

Compare to most OBD2 Scanners fit for Ford/Lincoln/Mercury/Mazda in the market, we found most of them

Limitedsystems diagnosis. Limited special functions. NO Bi-Directional Control or Programmable Module Installation.

Have towork with computer, need download extra software & USB driver, need SD Card and PC to update software

With 8 inch or smaller screen, inconvenientbutton operation and slow diagnosis, Unfriendly to use

NEED topay subscription fee for every years or even every month.

 

Why choose Launch X431 CRE Elite Diagnostic Scanner Tool fit for ford? Why is it so Powerful And Reliable?

Same Functions as LAUNCH X431 and OEM Tools/V.C.M II, including powerful OEM special functions like Programmable Module Installation(ECU Coding), Key Programming(Suits cars before 2008), D.P. F Regen, etc. but Launch Creader Elite Scanner is More valuable, Launch X431 CRE Elite Scanner fit for Ford Must Be the First Choice For You.

Launch X431 Creader Elite automatic scan tool is based on Andoird 5.0, 1GB running storage, 16G RAM. It can speed up data transfer and diagnostics time.

Launch X431 Creader Elite diagnostic scanner supports Full systems diagnostic, All Special Functions fit for Ford Vehicle like Ford F150, F250, F350, F450, Ranger, S-Max, C-Max, Transit, Mondeo, Fusion, Kuga, Mustang, Explorer, Edge, Focus, and other cars and light pickup Ford trucks. Also works for Lincoln/Mercury/Mazda produced after 1996.

Perfect gift for technician, Suitable for small auto repair shop and Personal Auto Repair, Give you More Faster & Smoother experience.

No subscription fees & Lifetime F~ree Update Online: All the functions have no extra subscription fee, any questions just feel free to contact us. Once active, all the functions are lifetime f~ree. At the same time, the online update is available and the vehicle will continuously update.

 

Full Systems Diagnoses In Vehicle Systems on the ECUs

MAX SYSTEM. MAX POWERFUL.

LAUNCH Creader Elite automotive scanner fit for Ford can scan 120+ modules like ECM(engine), TCM(Transmission), ABS, SRS(Airbag), Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset), Radio, EPB and so on to perform OE level diagnostics to read and clear codes, view live data stream, perform active tests, and retrieve ECU information, allows you to get a faster and more accurate test result on all electronic systems.

LAUNCH X431 Creader Elite Scanner provides more powerful features than scanner tool.

[Health Report Share & Print ] ALL MODULE Diagnosis Health Report Share & Print – ALL MODULE Diagnosis automatic diagnostic scanning tool enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet and compared or shared with customers.

[Plug and Play] Plug the diagnostic cable into the vehicle's DLC port, the screen of Launch Creader Elite tool fit for Ford will automatically light up and turn on. It is very convenient.

[Diagnostic History]This car diagnostic scanner records the every details of diagnostic session, provides a quick access to the tested vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime.

[Diagnostic Report]Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your mailbox. You can download it, and then print it to share it with others.

[Diagnostic Feedback]LAUNCH TECH’s engineers will help you troubleshoot problems. Customized exclusive beta version software for your car can be obtained here.

[Screen Snapshot] Snapshot graphing shows you any failures or glitches at a glance, you can share it to ask for help.

[4 in 1 Live Data Stream] There are 3 ways to view the data, you can choose the one that suits you best. Value–it is the default mode that displays the parameters in texts and shows them in list format. Graph–displays the parameters in waveform graphs. Combine–this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors. (Combine up to 4 options)You can also record the data stream and playback the data.

[Supported 11 Languages] English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese Traditional, Polski. If you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier.

[DCT Lookup] DTC Lookup is used to search for definitions of DTCs stored in the DTC libraryand for code breaker information, and Code Breaker is used to provide descriptions of DTCs and helpful tips to deal with DTCs.It is useful for technicians to find the root cause of trouble code faster, saving diagnosis and repair time.

[F~ree fit for Ford Brand] Launch Scan Tool compatible with Ford, Lincoln, Mazda OBDII cars from 1996-2024, 1994-1996 OBDI cars need to purchase extra connecting line, NO IP Limited.

Precisely Locate Issue, Turn Your Business to Fast Lane

>>> Powerful Bidirectional Control (Active Tests)

Bi-Directional Control is a feature that allows for two-way communication and control between scanner and car systems. It enables drive solenoids and actuators for active testing, sending commands to the system/component to test its operating status without using the vehicle controls. By utilizing Bi-Directional Control, technicians, mechanicians, car dealer, auto repair shop, DIYer or individual owner can actively monitor and control the behavior of a system, let you quickly understand whether a specific system, component, or subsystem is operating normally. It provides a more comprehensive and interactive approach to testing and troubleshooting, allowing for efficient identification and resolution of issues, pinpoint issues and greatly improve diagnostic efficiency.

Frequently-used Active Tests including: Evap Tests/ Purge Solenoid/ Fuel Injector Test/ Cycling A/C Clutch Relay/ Cycling Abs Motor Pump/ Cooling Fan Test/ Headlamp Test/ Sunroof/ Operate Mirrors/ Turn On The Sound Horn/ Turn On The Radiator Fan/ Open/Close Windows/ Turn On/Off The Lights/ Test Door Lock Actuators/ A/C Compressor Activation/ Modulate The Throttle/ Compression Test/ Turn On/Off Front And Rear Side Acm Solenoid/ Turn The Fuel Pump On And Off/ Cycling The A/C/ Clutch On And Off/ Left Clutch Electromagnetic Coil Test/ Acceleration Device Test/ Oil Pressure Control Test/ Dynamic Camera Aiming/ Vehicle Level Position Calibration/ Brake Vacuum Pump/ Inlet And Outlet Valve Tests/ Open Brakes Tests/ Parking Brake Botors/ Wheel Speed Sensor Supply/...

 

Launch X431 CRE Diagnostic Tool Supports Full Special Resets - DON'T BUY ANY SOFTWARE AT MALL

CONTINUOUSLY GROWING WITH UPDATES, which usually only be available from car Dealer Level Scanners or much more Expensive Professional Tools

Q : WHY CAN'T SEE ANY RESETS on my scanner, as its advertised all f~ree service functions.

A :The "RESET" option on home screen is a place to store software purchased at mall, which is prepared for other brands. Don't need to buy any resets fit for Ford brands, all f~ree resets are in the related systems. For example, to connect 2014 Ford F350, the way to use TCM‘s special functions should be to go to Diagnose>Manual Choose Model&Year>Automatically Search>System Selection> Transmission Control Module (TCM) > Special Functions, then you will be able to see the list of special functions supported by this system, There are more than 100 types of special functions for all systems combined.

PS: Functions vary by car models and years, please check the compatibility first.

EPB Reset (Electronic Parking Brake Reset) :After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.

Oil Lamp Reset :Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.

SAS Reset (Steering Angle Calibration Reset) :Learn to correct the angle and solve the problem of the steering angle of the steering wheel.

BMS Reset (Battery Register / Battery Maintenance) : Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.

ABS Brake Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.

SUS Reset (Suspension) : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.

TPMS Reset (Tire Pressure Monitor System Reset) : When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.

GEAR Reset (Gear Learning) : The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.

Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.

AFS Reset (Adaptive Frontlighting System) :It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.

11.Intelligent Cruise Control, 12.Engine Power Balance Moonitoring, 13.Motor Angle Calibration, 14. Head Light Fitting, 15.Seat Matching/Calibration, 16.Door and Window Initialization Study/Calibration, 17.Sunroof Initialization, 18.Air Suspension Matching, 19.Gearbox Matching, 20.Injector Calibration, 21.Multimedia Video Reset, 22.Cluster Reset, 23.Tire Change Reset, 24.Key Programming, 25.Coolant Bleed, 26.NOx Sensor Reset, 27.Stop/Start Reset, 28.Transport Mode, 29.Adblue Reset, 30.A/F, 31.A/C Relearn, more and more function will be kept growing and optimized constantly.

Advanced Functions for Single-Brand Vehicles

AUTOVIN

This option allows an automatic VIN detection when the tool is connected to the vehicle’s DLC successfully, it can identify car brand, model, and year info to shorten the navigation processee, no longer waste time manually inputting VIN code.

(*Note: AutoVIN DOES NOT work on All vehicles, perform "Diagnose>Manual Choose Model & Year is the same.)

LIFETIME F~REE UPDATE

Compared to other normal scanners, our high-end specialized Launch CRE scanner fit for Ford supports f~ree lifetime updates, saving costs on updates and maintenance fee, and improving your work efficiency. With one-click WIFI updates, you can save time connecting to your computer and make the process faster and more convenient.

4-IN-1 LIVE DATA STREAM GRAPHING

LAUNCH X431 Elite OBD2 scanner fit for Ford can clearly display real-time data in text and graph, allows you to view multiple graphs simultaneously or merge 4 graphs in one for comparison. You’ll easily focus on any symtom-specific or suspicious data parameters. Review Freeze Frame Data + Historical Record , helping you further check potential problems of the vehicle.

ODOMETER CONFIGURATION

The odometer configuration can affect the accuracy and reliability of the distance measurement, as well as the ease of reading and interpreting the information displayed.

Mileage learning is the need to match the original data when replacing the instrument, which can restore the mileage to the original mileage, but not adjusting or modifying the mileage, so sorry that all Launch Scanners don't have an odometer corretction feature.

KEY PROGRAMMING(BASIC)

Notice: Not suits for all car models and years, please check the compatibility for us first via email , tks!

In order to prevent the car from being used by illegal keys, the car can be opened and used normally only after the remote key is recognized and authorized by the IMMO System. LAUNCH X431 CRE Scan Tool supports Add, Delete Keys, Remote Key Fob Learn/ Entry, Smart Key System on a Ford vehicle before 2008, keep your car safe and prevent it from being stolen.

PROGRAMMABLE MODULE INSTALLATION

Function Fit For Ford/Lincoin/Mazda, etc. When you replace or initialize a new/used module fit for Ford/Lincoln/Mazda, Launch CRE Scanner fit for Ford allows you to copy the data from the original module and install it to the new unit to finish the module replacement.

(*Note: Function does not suit for all car models and years, please check the compatibility for us first via email, tks!

Single-Brand Serie Car Diagnostic Scan Tool, All Car Brand OBD Scanner Tool

Oe-Level Intelligent Diagnostic Scanner

The Lanuch Creader Elite Scan Tool can diagnostic Full OBD 10 modes on global OBDI/OBDII/EOBD

 

 

 

 

DataCaciques