Proximity Smart Remote Auto Car Key fob 315Mhz PCF7953P 49 CHIP for Mazda CX-5 CX-9 2016 2017 2018 2019 SKE13D-02 / 01


Specification:

315MHz FSK

PCF7953P / HITAG PRO / 49 CHIP

FCCID:WAZSKE13D02/01

IC:662F-SKE13D02 /01

Model: SKE13D-02/01

After Market


Features:

1.Note: Aftermarket remote key ,no label on the back. the same function as the genuine.

2. It comes with blank blade, new remote control FOB and new battery

3.Please make sure your key is exactly the same as ours(the same frequency,chip,shape, buttons and part number), then it will work.


Compatible with the following:

for Mazda CX-5 with Power Liftgate2017-2019

for Mazda CX-9 with Power Liftgate2016-2019


Note:

SKE13D-02 use for new Mazda, and it is compatible with SKE13D-01, if you receive the item where the key shell has"SKE13D-02" or other letters, please ignore it. It can work for you after programmed.


Programming:

You will need to have this key cut and programmed by a competent local automotive locksmith.

Main dealers will not programme aftermarket keys as they are only able to programme genuine keys due to having limited software capabilities.



Mazda matching frequently asked questions:

1. Can't learn, our new key is new, the key code is 13D02 (315 frequency) or 13E01 (315 frequency), when matching, you need to enter the anti-theft matching system after 16 years, and you need to wait 7 minutes after entering the system Matching starts from left to right. If you enter the matching system, it directly prompts that the matching failed, indicating that the system entered the wrong way.


2. The matching is successful, but there is no intelligence. This is because the matching process is not complete. Each key needs to be activated once separately. Then all the keys are taken out of the car, and the car is remotely locked, unlocked, and then entered into the car. Emergency start. After the completion, replace the key and repeat this action. Note that when the emergency starts, press and hold the key on the side of the car for 5 seconds.


3. There is a fault light when the matching is completed. This is because the key model is wrong. At least two correct keys are required to be lost, so that the fault light will be eliminated.