NF-826 Underground Cable Tester Locator Wire Tracker Detector, Wall and Underground Pipeline Wire Detector. Test Short Circuit Breaker of Wall and Underground Cables.
- 1. NF-826 Underground & In-Wall Wire Locator is a portable instrument,which consists of transmitter, receiver and accessories.Selecting new integrated devices and digital circuit technology, the electrical performance is stable and reliable. According to the change of the signal, the specific location and fault of the buried cable or pipeline can be detected.
- 2. It Can Detecting cables, electrical lines, water/gas supply pipelines buried in wall or earth; interruptions and short circuit in cables and electrical lines buried in wall. Detecting fuses and assigning current circuits;Detecting interruptions and short-circuits in floor heating
- 3. The sensitivity of the receiver can be adjusted either manually or automatically. can sweep frequency automatically. Both the transmitter and the receiver can work under mute mode. Additional transmitters are available to extende or distinguish multiple signals. it can automatically turn off the power after 10 minutes,If you forget to turn off the power when you are not using it.Compactness-durability and portability.
- 4. The transmitter is integrated with the function of AC/DC voltmeter, which can measure : 12 to 400V AC/DC voltage on a linear basis: AC: 12 ~ 400V (50 to 60 Hz) ± 2.5%.DC: 12~400V ±2.5%
- 5. Applications: Installation and maintenance of weak current system, communication line, comprehensive wiring circuit, telephone system, computer network, other metal wire circuit etc.
Product Description:
Applications:
Installation and maintenance of weak current system, communication line,
comprehensive wiring circuit, telephone system, computer network, other
metal wire circuit etc.
LCD Screen:52*35mmTN screen with backlight
transmitter signal frequency: 125KHz
Signal Vp-p:<8V
transmitter self-inspection:Yes
Circuit voltage testing:AC:12~400V(50~60Hz)+/-2.5%
DC:12~400V +/-2.5%
Interface type: multimeter jack
Max working current:<250 mA
Demension:158*80*33mm
LCD Screen:52*35mmTN screen with backlight
Received signal frequency:125KHz
Max reception range:<60cm
Reception mode:Manual / Auto
NCV function:AC:50~400V(50~60Hz)+/-2.5%
Auto-off time:10 mins
Max working current:<250 mA
Demension:228*74*28mm
Key:silicon keys * 8
Accpetable transmitter signal codes :6 types
Acceptable transmitter signal amplitude:3 degrees
LCD backlight :on/off
Power supply:3.7V 1400mAh Lithium battary
Charging voltage :DC5V
Charging current:<600mA