ESP32-S3 N16R8 Modul

ESP32-S3 CAM Modul OV2640 Set ESP32-WROOM N16R8 8M PSRAM BT 5.0 Tasmota Arduino Espressif Python Modul

ESP32-S3 N16R8 OV2640 CAM Module Set © androegg

ESP32-S3 N16R8 OV2640 CAM Module Set 8MB PSRAM Bluetooth 5.0 © androegg

ESP32-S3 N16R8 OV2640 WiFi CAM Module Set 16MB Flash © androegg

  

Das ESP32-S3 OV2640 Camera Modul Set beinhaltet:

  • 1 Stück ESP32-S3 Kamera Modul mit integriertem SD Kartenleser
  • 1 Stück OV2640 Kamera Modul
  • 2 Stück Pinleiste

    •  

    Das ESP32-S3 OV2640 Camera Board verfügt über

  • Boot / GPIO0 Taster
  • Chip Enable / Reset Taster
  • Power ON Status LED
  • IO2 Status LED
  • UART RX und TX Status LED
  • SK6812 RGB LED / GPIO48
  • 2 USB-C Schnittstellen
    • 1 x USB OTG
    • 1 x UART zur seriellen Kommunikation
  • CH340 USB TTL Konverter
  • AMS1117 Spannungskonverter 3,3V
  • Micro SD SPI Kartenleser (GPIO 38, GPIO 39, GPIO 40)
  • OV2640 Kamera Modul Anschluss (GPIO 4, 5, 6, 7, 8, 9, 10 , 11, 12, 13, 15, 16, 17, 18)
  • MSM261S4030HOR I2S Audio Schnittstelle

    •  

    Der OV2640-Bildsensor ist ein ultra kompakter Bildsensor mit optimierten Energieverbrauch. Das OV2640 Kamera Modul erfüllt alle Funktionen einer einzelnen UXGA-Kamera / Bildprozessors.

    Die SCCB-Bussteuerung erlaubt 10-Bit-Sampling sodass verschiedene Auflösungen individuell konfiguriert werden können.. Gleichermassen können

  • Bildqualität
  • Datenformat
  • Übertragung
  • Gammakurve
  • Weißabgleich
  • Sättigung
  • Chrominanz
  • Ausgabeformat RGB565 / JPEG / YUV / YCbCr
  • usw.

    • individuell konfiguriert werden. Bitte beachten vorgenannte Parameter stehen selbstredend in Abhängigkeit der jeweilig verwendeten Firmware / Bibliothek.

     

    ESP32-S3 Modul basiert auf dem Espressif Xtensa dual core LX7 Microprozessor mit 8MB PSRAM (GPIO 35, 36, 37) und 16MB Flash.

    Das ESP32-S3 eignet sich für

  • Espressif ESP-IDF SDK
  • Python
  • Python Thonny
  • CircuitPython
  • Espressif IDF
  • Arduino (Espressif ESP32 Arduino Core 2.0.3 und höher)
  • Tasmota (tasmota32s3- binaries)

    •  

    Die ESP32-S3 LX7 Xtensa® Dual Core 32bit MCU erreicht bis zu 240MHz.

     

    ESP32-S3 N16R8 Modul

    Das ESP32-S3 Modul unterstützt

  • 802.11 b/g/n Standard
  • HT40 WLan Transceiver
  • Bluetooth bis 5.0
  • Takfrequenz 240MHz
  • SRAM 512kBytes
  • 8 MB PSRAM
  • 16 MB Flash
  • bis zu 45 GPIO
  • unterstützte Schnittstellen
    SPI SD Karte,
    UART,
    SPI,
    SDIO,
    I2C,
    LED PWM,
    Motor PWM,
    I2S,
    IR,
    pulse counter,
    GPIO, capacitive touch sensor,
    ADC 12-bit (bis zu 20 Kanäle),
    DAC,
    Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

    •  

    The ESP32-S3 OV2640 Camera Module Set includes:

  • 1 piece ESP32-S3 camera module with integrated SD card reader
  • 1 piece OV2640 camera module
  • 2 pieces pin strip

    •  

    The ESP32-S3 OV2640 Camera Board features

  • Boot / GPIO0 button
  • Chip enable/reset button
  • Power ON status LED
  • IO2 status LED
  • UART RX and TX status LED
  • SK6812 RGB LED/GPIO48
  • 2 USB-C interfaces
    • 1 x USB OTG
    • 1 x UART for serial communication
  • CH340 USB TTL converter
  • AMS1117 voltage converter 3.3V
  • Micro SD SPI card reader (GPIO 38, GPIO 39, GPIO 40)
  • OV2640 camera module connector (GPIO 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18)
  • MSM261S4030HOR I2S Audio Interface

    •  

    The OV2640 image sensor is an ultra compact image sensor with optimized energy consumption. The OV2640 camera module fulfills all the functions of a single UXGA camera / image processor.

    The SCCB bus control allows 10-bit sampling so that different resolutions can be individually configured

  • picture quality
  • Data format
  • transmission
  • Gamma curve
  • White balance
  • saturation
  • Chrominance
  • Output format RGB565 / JPEG / YUV / YCbCr
  • etc.

    • can be configured individually.

    Please note the above mentioned parameters are of course dependent on the respective firmware/library used.

     

    ESP32-S3 Module based on Espressif dual core LX7 MCU with 8MB PSRAM(GPIO 35, 36, 37) .

    The ESP32-S3 Developmnet Baord supports

  • Espressif ESP-IDF SDK
  • Python
  • Python Thonny
  • CircuitPython
  • Espressif IDF
  • Arduino (Espressif ESP32 Arduino Core 2.0.3 and later)
  • Tasmota (tasmota32s3- binaries)

    •  

     

    The ESP32-S3 LX7 Xtensa® Dual Core 32bit MCU supports up to 240 MHz.

     

    ESP32-S3 N16R8 Modul

    The ESP32-S3 Module supports

  • 802.11 b/g/n Standard
  • HT40 WLan Transceiver
  • Bluetooth up to 5.0
  • Frequency 240MHz
  • SRAM 512kBytes
  • 8MB PSARM
  • up to 45 GPIO
  • supported Interfaces
    SPI SD Karte,
    UART,
    SPI,
    SDIO,
    I2C,
    LED PWM,
    Motor PWM,
    I2S,
    IR,
    pulse counter,
    GPIO, capacitive touch sensor,
    ADC 12-bit (up to 20 channels),
    DAC,
    Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

    •  

    Ihre Vorteile

    • wir berechnen Nur 1 mal Versandkosten (ganz gleich wie viele Artikel)
    • Versand erfolgt 6 Tage die Woche (Mo. - Sa.)
    • Bestellungen bis 12:00 Uhr Versand noch am gleichen Tag
    • Fragen oder Problemen? kurze Nachricht genügt

     

    your benefit

    • we only charge shipping costs once
    • we ship 6 days a week (Mo. - Sa.)
    • Orders before 12:00 same day shipped
    • Questions or Problems? Just send a message

    ESP32-S32 N16R8 OV2640 CAM Module Features:

    • Power Supply: 5V
    • I2S Audio Interface: MSM261S4030HOR
    • Boot / GPIO0 button
    • Chip enable/reset button
    • Power ON status LED
    • IO2 status LED
    • UART RX and TX status LED
    • SK6812 RGB LED/GPIO48
    • Dual USB-C
      • 1 x USB OTG
      • 1 x UART for serial communication
    • CH343 USB TTL converter
    • AMS1117 voltage converter 3.3V
    • Micro SD SPI card reader (GPIO 38, GPIO 39, GPIO 40)
    • OV2640 camera module connector (GPIO 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18)

     

    ESP32-S32 N16R8 Features:

    • CPU / MPU:
      Frequency: up to 240 MHz. based on Xtensa LX7
      448 KByte ROM size
      520 KByte SRAM size
      8MB PSRAM
    • 802.11 b/g/n/e/i protocol
    • supports Wi-Fi Direct (P2P)
    • soft-AP Integrated TCP/IP protocol stack
    • 802.11 n (2.4 GHz), up to 150 Mbps
    • 802.11 e: QoS for wireless multimedia technology
    • Block ACK
    • Fragmentation and defragmentation
    • Automatic Beacon monitoring/scanning
    • 802.11 i security features: pre-authentication and TSN
    • Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
    • Infrastructure BSS Station mode/SoftAP mode Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
    • UMA compliant and certified
    • Antenna diversity and selection
    • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
    • deep sleep current of < 2.5uA
    • Class-1, class-2 and class-3 transmitter without external power amplifier
    • Enhanced power control
    • +10 dBm transmitting power
    • NZIF receiver with -98 dBm sensitivity
    • Adaptive Frequency Hopping (AFH)
    • Standard HCI based on SDIO/SPI/UART
    • High speed UART HCI, up to 4 Mbps
    • BT 4.2 controller and host stack
    • Service Discover Protocol (SDP)
    • General Access Profile (GAP)
    • Security Manage Protocol (SMP)
    • Bluetooth Low Energy (BLE)
    • ATT/GATT
    • HID
    • All GATT-based profile supported
    • SPP-Like GATT-based profile
    • BLE Beacon
    • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
    • CVSD and SBC for audio codec
    • Bluetooth Piconet and Scatternet