Application Mini shotgun hypercardioid condenser microphone designed to be suspended in places of worship, conference halls, theatres etc.

Type Condenser (back electret)

Polar Pattern Hyper Cardioid

Frequency Response 50Hz - 18 KHz

Sensitivity -37dB +/- 3dB @ 1 KHz (0dB = 1 V/Pa)

Impedance 1.8 K Ohms

S/N Ratio 69dB(A)

Maximum Sound Pressure Level 125db at 1KHz 1% T.H.D.

Power Requirements 1.5-9 volts max through series resistor

Termination Open ended 2 core + screen, Requires PPA or Line Level Pre-Amp.

Supplied Accessories W8 foam windshield included

Finish Satin Black or White.

Dimensions 12mm (0.5") Head, 6mm (0.25" ) Flexible shaft

Weight 7.6/8.9oz

Architects and engineer specifications The back electret condenser hanging mini shotgun microphone has a hypercardioid polar pattern. It is made of robust high quality brass construction and is a slimline design. It contains a miniature flexible gooseneck and knuckle joint configuration which will allow the microphones head to rotate almost 90 degrees vertically to facilitate optimum positioning. The microphone has a combined suspension and signal cable length of 25ft (7.5 metres). The microphone requires a Phantom Power Adaptor or Line Level Pre-Amp accepting 1.5-9 volts DC, The microphone is terminated in bare wires The microphone Frequency response 50 Hz to 18 KHz; Impedance 1.8 K Ohms; Sensitivity -37dB +/- 3dB @ 1Khz (0dB=1V/Pa); Total Harmonic Distortion (THD) at an operating level of 125dB is no greater than 1%. A W8 windshield is supplied. Finish: Satin Black or White.