Special buy it now for 

christinamarielobello for the door files only

his door was French doors  We can make any size This has Low E dual glazed glass

Pre hung door Width  95” Height 81”

 Jamb 3-9/16  kerfed on both sides

door thickness  2”. 

 

This is going to be an entry double door with a side lite on the left and right that will be operable and open in.

 

All jambs to be kerfed for weather stripping, including the side lites.

 

The outer jamb for the unit will be kerfed both sides instead of trim.

 

The pre hung unit includes two 30” doors and two side lites evenly with the rest of the measurements which would be about 22” each.

 

There will be the outer and header jambs plus jambs between the doors and the side lites.

All doors and side lites kerfed for weather stripping. Outer jamb for unit kerfed both sides in place of trim. Side lites will be made to accept full width and length screen. We will make the screens at the shop.

Rustic door solid wood oak mahogany alder birch maple Choose species/size  Winery estate church castle 

Reclaimed 70 - 100 year old Doug Fir upon request. 

Custom built from scratch. You tell us the rough opening/jamb width/glass choice if any and swing of the door and the species of wood.

 

“Unusual doors often take you to the unusual worlds” Mehmet Murat Ildan

Doors create a magnificent first impression. Yours can go beyond being

a simple entry way to one that reflects your personality and adds character

and warmth. No two doors are every exactly alike. Each board of wood has

it’s own unique character.  From simple to elaborate our rustic doors provide

you with the look and personality and mood you want.

Our doors are made here in San Diego by our very talented carpenters.

We buy our hardwoods from a company here in San Diego and we can offer

Alder, mahogany, oak, maple and birch.  Upon availability we can offer the

Reclaimed Doug Fir 70 – 100 years old. Our wrought iron is hand made

and hand forged by blacksmiths. We will be glad to have custom out of the box

designs made for you. 

What we will need from you is the rough opening. We will take ½” off each way for the pre hung measurement.  We need the jamb width and we can make the jamb any size.  You are not limited to normal jamb sizes. I need the swing of the door and the species of wood.

I need to know if the speakeasy is operable. Do you want glass and a wooden door in the speakeasy or just glass or just the wooden door. We can change out the hardware for you for example if you prefer a square cage or a grapevine cage or a different door knocker.  We can make a door knocker with your initial.  We can make custom speakeasy cages. If you see a door you like all of the hardware comes with it. We do not do the bore holes. We can give you a decorative pull. Most people get their locksets locally. Doors are generally 1-7/8 to 2” thick.  You will receive TWO sets of trim/casing. You tell us what kind. Exterior/interior.

For double doors you will receive upper and lower throw bolts. Weather stripping included. We can also do kerfed jambs.

If you are in a Title 24 State for the glass where it has to be Low E dual glazed tempered you are responsible to let me know. Please check with your State requirements otherwise we will give you tempered or laminate glass. You may choose among a dozen different glass designs and we also have clear and a swirly seedy.

Our doors are solid wood. We never use engineered wood or fillers or veneers. These doors are built to last in most cases longer than we do. 😊 Unless all you want is a replacement door the single doors come pre hung in the frames/jambs. For double doors that are shipped we breakdown in the very well made protective crates with instructions for assembling the jambs.  We often deliver to Texas and California and Arizona and Nevada so if you order double doors there is a good chance we have a trip coming up and can bring the double doors to you still in the frame without breaking down. We will also send you a video my grandson made on how to stain the doors which is very easy to follow.

Upon request I can send you the files of all of the doors we have made.

You can also send a picture of a door you would like that you draw up or find online.

Since 2014 we have made approximately 10,000 doors. Many of those doors started out as a customer’s rough ideas drawn on a piece of paper that we were able to bring to life.  We do have discounts for multiple doors and shipping discounts.  We will be happy to look sat your door schedule. We are running 4 – 6 weeks for production.

We do not stain your doors in most cases but we do have one of our alder carpenters who will do a light, medium or dark brown stain and clear coat. I can send you those color choices.

Doors are made at 4178_D Cartagena Drive in San Diego.  For local pick up that is where you would go. We have a forklift on site if needed. If you are in Alaska or Hawaii check for shipping costs.