Detail Dragon 7339 1/72 scale WW.II GERMAN PANTHER G TYPE STEEL ROLLING WHEEL TYPE
Real reproduction in 1/72 one characterized by the undercarriage of steel rolling wheel specifications ! [About the
actual vehicle] - It was the Soviet T-34 that intercepted the German army that invaded the Soviet Union in World War II. - Excellent inclined armor at the beginning of the hit bounced off the German anti-tank gun, it was supposed to panic the German army. -As a result of investigating and researching the T-34 in a report from the front line, the German army created a Panther tank. -A major feature is that the car body armor adopts an inclined armor design, and the main gun is equipped with a 7.5 cm long barrel tank gun with high power. - The suspension adopted a torsion bar type. - Start production of the first type, D type from the end of 1942. - Improvements corresponding to various troubles are advanced, and in 1943, A type, which becomes an improved type, appeared. - After that, production began in 1944 is the G type. - G type was aimed at strengthening armor and improving productivity, it became the largest production model in the Punter series where nearly 3000 cars were produced. -In addition, from September 1944, a type equipped with a steel rolling wheel with a diameter of 800 mm was also produced. -Instead of attaching rubber tires to the outer periphery of the wheel, rubber is attached to the axle part of the center of the rolling wheel. < - I was active being sent to the battlefield. [About the model] - The model is a plastic model assembly kit that reproduces the German masterpiece tank Panther G of World War II on 1/72 scale that is also affordable for the collection. - Among the G type, we are modeling a vehicle equipped with a steel rolling wheel. - The lower part of the car body is an integral part using a slide mold. - Suspension arm is also modeled integrally, easy to assemble. -The wheel attached to the suspension arm also firmly expresses the details. - Steel rolling wheel type detail reproduces the characteristic feet. - Set the belt type parts on the track. I tighten the feet by adding reality to ease of assembly. - The upper part of the car body reproduces not only the shape but also the details of the details in detail. - The rear engine deck sets an integral interior parts with fans and the like expressed. - Interior with a three-dimensional feeling peeking from the slit is full of reality. - The upper part of the car body is also modeled as in-vehicle tools and spare track. You can enjoy the finish with a three-dimensional effect. - The expression of the texture of the armor plate adds a sense of weight. - Set the turret a gun barrel reproduced integrally up to the muzzle brake. - It is reproduced in the slide mold, enhancing the reality. - Exhaust pipe at the rear of the car body, of course, prepare parts that reproduce the shape unique to G type. - It is a kit that details can not be overlooked even in 1/72. [Main features] - Reproduce the German tank punter of World War II on 1/72 scale ● Reproduce the body design of inclined armor, turret, around the car body with plenty of real feeling ● Model the type equipped with a G-type steel rolling wheel - The upper part of the car body reproduces the engine deck interior with separate parts ● Plenty of details such as in-vehicle tools and spare rolling wheels on the side of the car body also plenty of feeling ● The main gun barrel is reproduced integrally to muzzle brakes using slide molds ● Size at the time of completion: total length about 123 mm - Package size : 26.1 x 16.4 x 5.2 cm
Copyright©2018 DataCaciques 
Detail Dragon 7339 1/72 scale WW.II GERMAN PANTHER G TYPE STEEL ROLLING WHEEL TYPE
Real reproduction in 1/72 one characterized by the undercarriage of steel rolling wheel specifications ! [About the
actual vehicle] - It was the Soviet T-34 that intercepted the German army that invaded the Soviet Union in World War II. - Excellent inclined armor at the beginning of the hit bounced off the German anti-tank gun, it was supposed to panic the German army. -As a result of investigating and researching the T-34 in a report from the front line, the German army created a Panther tank. -A major feature is that the car body armor adopts an inclined armor design, and the main gun is equipped with a 7.5 cm long barrel tank gun with high power. - The suspension adopted a torsion bar type. - Start production of the first type, D type from the end of 1942. - Improvements corresponding to various troubles are advanced, and in 1943, A type, which becomes an improved type, appeared. - After that, production began in 1944 is the G type. - G type was aimed at strengthening armor and improving productivity, it became the largest production model in the Punter series where nearly 3000 cars were produced. -In addition, from September 1944, a type equipped with a steel rolling wheel with a diameter of 800 mm was also produced. -Instead of attaching rubber tires to the outer periphery of the wheel, rubber is attached to the axle part of the center of the rolling wheel. < - I was active being sent to the battlefield. [About the model] - The model is a plastic model assembly kit that reproduces the German masterpiece tank Panther G of World War II on 1/72 scale that is also affordable for the collection. - Among the G type, we are modeling a vehicle equipped with a steel rolling wheel. - The lower part of the car body is an integral part using a slide mold. - Suspension arm is also modeled integrally, easy to assemble. -The wheel attached to the suspension arm also firmly expresses the details. - Steel rolling wheel type detail reproduces the characteristic feet. - Set the belt type parts on the track. I tighten the feet by adding reality to ease of assembly. - The upper part of the car body reproduces not only the shape but also the details of the details in detail. - The rear engine deck sets an integral interior parts with fans and the like expressed. - Interior with a three-dimensional feeling peeking from the slit is full of reality. - The upper part of the car body is also modeled as in-vehicle tools and spare track. You can enjoy the finish with a three-dimensional effect. - The expression of the texture of the armor plate adds a sense of weight. - Set the turret a gun barrel reproduced integrally up to the muzzle brake. - It is reproduced in the slide mold, enhancing the reality. - Exhaust pipe at the rear of the car body, of course, prepare parts that reproduce the shape unique to G type. - It is a kit that details can not be overlooked even in 1/72. [Main features] - Reproduce the German tank punter of World War II on 1/72 scale ● Reproduce the body design of inclined armor, turret, around the car body with plenty of real feeling ● Model the type equipped with a G-type steel rolling wheel - The upper part of the car body reproduces the engine deck interior with separate parts ● Plenty of details such as in-vehicle tools and spare rolling wheels on the side of the car body also plenty of feeling ● The main gun barrel is reproduced integrally to muzzle brakes using slide molds ● Size at the time of completion: total length about 123 mm - Package size : 26.1 x 16.4 x 5.2 cm
After we received your payment, your item will be shipped out within 3-5 business day. Please note that our working days shall be from Monday to Friday, exclude Saturday, Sunday and Public Holidays.
Return
*We will refund only for faulty items.If you have chosen the wrong size we can exchange but postage for the both ways to be paid by purchaser.please contact us if you have any problems before leaving negative feedback.We bag your pardon that due to the high shipping cost exchange or return is not offered.We provide excellent customer service and believe that most problems,can resolved to the satisfaction of both parties please ask questions prior to purchase.
Contact us Customer satisfaction is important to us and our feedback rating reflects it . If you have any questions before and after your purchase,Do not hesitate to contact us , we welcome you to email us, we strive to answer all questions and resolve any problems as quickly as possible.
Please leave us your positive feedback and 5-star rating if you are satisfied with our items and service. You will be greatly appreciated. If not quite satisfied, please do contact us before leaving the feedbacks. We will surely solve the problem for you satisfactorily. (100% communication, 100% refund, 100% replacement) Please do give us a chance to make things right before any negative or neutral feedback left
|