RadioMaster Boxer Radio Transmitter 2.4G 16CH Hall Gimbals RC Remote Controller with Carrying Case CC2500 ELRS 4in1 Version Multi-Protocol Support EdgeTX for RC Drone
Features:
1. Multi-channel Hopping Frequency - This system bandwidth ranges from 2.4GHz to 2.48GHz. 16 channels reduce interference from other transmitters.
2. Low Power Consumption - The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming low power, dramatically extending battery life.
3. Available with built-in ExpressLRS or 4-in-1/CC2500 MPM RF modules. Featuring a powerful STM32VGT6 processor with 1MB RAM.
4. Compact design with excellent ergonomics; New low-profile latching SE switch and momentary SF switch. Standard JR module compartment; RadioMaster standardized button layout.
5. Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included); Full sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals.
Descriptions:
The perfect combination of size and ergonomics make the BOXER an ideal choice for pilots on the go. Featuring full size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.
Specifications:
Item: BOXER Radio
Size: 235*178*76.7mm
Weight: 532.5g
Frequency: 2.400GHz-2.480GHz
Internal RF Options: CC2500 multi-protocol / 4-in-1 multi-protocol / ELRS 2.4GHz
Supported protocols: Module dependent
Transmitting Power CC2500 and 4IN1: Max 20dBmTransmitting Power ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
Cooling fan: Built in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / Multi-Module (RF module) / ELRS
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V Lithium-Ion cells (batteries not included)
Display: 128*64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
External module: JR / FrSKY / Crossfire compatible
Upgrade Method: USB / SD card & EdgeTX Companion PC software
M1=Mode 1 (Right throttle)
M2=Mode 2 (Left thottle)
Notes:
CC2500 (standard) Version supports all CC2500 protocols.
4in1 (standard) Version supports all MPM protocols.
ELRS (standard) is pre-installed witn ExpressLRS ISM FW (Max power is hardware dependnant).
----
CC2500 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT & HoTT LBT.
4in1 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT, HoTT LBT and DSMX.
ELRS LBT (Europe) Version is pre-installed with ExpressLRS CE EU domain LBT FW (Limited to 100mw power output).
Package Included:
1 * BOXER Radio
1 * Signature Carry Case
1 * T Antenna
1 * USB-C Cable
1 * Gimbal Protector
1 * 1.5mm Allen Key
2 * M4*4 Screws
4 * Low Tension Springs
1 * Stickers
1 * Manual
1 * Battery tray (Batteries not included)
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.
