If you want great quality at a great price for your hot rodding project look no further.
Up for sale is a hand built, chambered Strat Alder body with a flame maple drop top, full 1/4". Ready for final sanding and finish application Specs below. The body pictured is what you will get.
NOTE: This is an unfinished body sanded to 220 grit and we have wetted it before taking the picture to show the figure as if it had finish. Some sanding and/or grain filling may be required
Made by hand in the USA by Sonorous Custom Guitars, with 13 years of luthier experience.
********** Please read through entire listing before considering a purchase and thank you for having a look! **********
Not exactly what you need? We take requests! Message for more info.
Body wood: 2 piece Superior Alder
Top wood: 2 piece book matched flame maple
Total thickness: 1 & 3/4"
Top thickness: 1/4"
Edge radius: 1/4"
Weight: 3 lbs 12 oz
Neck pocket: 2 & 3/16" wide and 5/8" deep (2&15/16" long pocket) (EXACT DIMENSIONS) **Designed for necks with scale lengths of 25 & 1/2" and 21 frets (or a neck with an overhanging fingerboard with 22 frets) ONLY
Chambered: Message for routes if needed
Comfort carves: Arm contour and belly carve
Bridge routes: Tremolo block route on top is 3/4" by 3 & 3/16". Distance from end of neck pocket to front edge of tremolo block route is 7 & 3/8". Fits many two post and 6 screw style tremolos, Will need to be drilled for mounting screws/posts.
Back route is 5/8" deep and will need to be drilled for spring claw.
Electronics routes: Humbucker pickups cavity depth = 3/4" pickup cavities are 1 & 9/16" by 3 & 5/16" wide (bracket to bracket) bridge pickup route will fit up to F spaced. Control cavity depth (cover back to top) = 1 & 1/2" Control cavity is 1 & 1/16" by 5 & 1/2" remaining top thickness at controls = 5/32" (to accommodate switch mount) Potentiometer holes = 3/8" Jack cavity diameter = 7/8" All wire channels have been drilled.
Backplates: 3/32" thick. Control cover is recessed, tremolo cover is NON-recessed. We leave the tremolo cover non-recessed to accommodate longer blocks. PLEASE MESSAGE US BEFORE PURCHASE IF YOU WISH TO HAVE THE TREMOLO COVER RECESSED.
Custom taper on back of neck heel and optional middle pickup route available upon request
NOTE: Please use the above measurements as a guideline for your hardware to ensure fit. We took care to make sure this body is as universally compatible with most US parts associated with this style of guitar but adjustments may have to be made.
Free ground shipping! Excludes Hawaii/Alaska
We reserve the right to change shipping carrier
International shipments are handled through eBay's International shipping program.
30 day returns accepted
Made at isdntek PrettyBorders