Description:
New and high quality
Made of high-quality materials,
1 pair of fiber electrode 3/5/7 fusion splicer for INNO IFS-15 IFS-15H IFS-10 view
Installation and maintenance
Type: optical fiber electrode
View 3, View 5, View 7
Discharge time: 3000 times

Electrode replacement method:
Fir st of all, make sure that the welding machine is closed.
Remove and release the protective cover of the electrode compartment.
Fix the upper electrode and remove the upper electrode. Then release the top.
Connect the lower electrode and remove the lower electrode.
Next, install a new electrode. The steps are reversed to the following method
Remove the electrode. You can do it inside. The difference between the two
Both electrode tips must be 2.6 +/- 0.2 mm.
Finally, do not touch the tip of the electrode during the assembly process.
Prevent electrode damage and avoid electrode damage
Fall into the machine. After replacing the electrode, the arc position should be
Calibration.
Electrode cleaning and
Arc calibration:
After installing the electrode, turn on the power switch of the welding machine.
Implementation.
After the welding machine enters the initial screen, press the menu key to enter the first-level menu.
Move the cursor to find the machine repairman and input the cleaning electrode.
After confirmation, the machine will automatically discharge and clean the aging electrodes.
Install the cut left and right optical fiber, move the optical fiber to find the curved position cursor, and maintain the position between the three-point and the single-wire optics.
The tip of the fiber and two electrodes pass through. The discharge test will be carried out by the machine and can be adjusted according to the actual situation.
Finally, press the menu key to exit.

Package Included：
1 pair * optical fiber electrode


Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.