Product Description
--UL2272 Certified, link to UL Certification - https://productiq.ulprospector.com/en/search
Product Function:
Electricially powered, user controls the direction and speed of the vehicle by shifting their body weight.
Safety Reminders:
1. Before using the hoverboard, make sure you fully understand and foll all safety rules and instructions.
2. It is not recommended to use the electric balance scooter on steep slopes, crowded or slippery conditions.
3. Always use the balance scooter in a safe location and be aware of your surrountings to prevent potential dangers.
4. The balance hoverboard is not suitable for use in rainy or watery environments as moisture can damage electrical components.
5. Always use safety equipment that meets safety standards, including but not limited to helmets, knee pads, and gloves.
How to use:
Make sure the balance scooter is fully charged and turened off.
Turn on the power, place your feet on the footboards on both sides of the balance scooter on a flat ground.
Keep your balance, and then lean forward slightly to start moving.
Leans left or right to turn. To stop, keep your body balanced and lean back slightly.
The hoverboard has a self-balancing system, if the hoverboard is not balanced, it will beep with ther flashing lights. Hoverboard use sensors to detect the weight and position of the rider.
hoverboard P6 Specifications:
* Color: Ice Flame
* Model: Hoverboard P6
* Speed Protection: 6-7.5 MPH
* Distance: around 3-5 miles (depends on rider's weight, road conditions etc)
* Max Climbing Slope: Approx 15°
* highest power: 500W(contain)-1000W(no contain)
* Using temperature: -10°C-40°C(recommending at 10°C-30°C)
* Max load: 100 kg
* Minimum load: 20 kg
* Net weight: Approx 14 Ibs
* Dimensions: 62 cm x 20 cm x 20 cm (L x W x H)
* Power: 250W*2
* Charging Voltage: AC100-240V/50-60HZ; DC29.4V-1A
* Charging Time: About 2-3 Hours
* Low Battery Protection when battery is lower than 10%, it will slow down and finally stopped working.
How to let the hoverboard play music via Bluetooth?
First turn on the Bluetooth on your cellphone or other device, search for the surrounding Bluetooth device, then connect the hoverboard. After that, you play music on your phone or device. Then you can listen to music from the hoverboard.
Calibrate your hoverboard:
If the beeping is due to an imbalance or calibration issue, you will need to recalivrate your hoverboard.
Please follow steps:
1. make sure the hoverboard is fully charged
2. Keep the hoverboard pedal to the groud
3. Turn off the hoverbaord, then press and hold the power button for about 10 seconds. (you will see the LEDs flash 5-6 times and light up continuously after 6 flashes.)
4. Turn off the hoverboard once more to finalize the calibration
5. Turn on the hoverboard and it will be in good condition again, and you can continue to use it without fear.
If the beeping continues despite your troubleshooting efforts, or if it is due to a hardware or software issue, you might need to get your hoverboard serviced by a professional or contact the manufacturer for further assistance. In some cases, the hoverboard might need to repair or parts replacement.