Important Notes

	  DO NOT ADD "NOTES TO THE SELLER" DURING CHECKOUT

	We strive to ship your order as fast as possible so we utilize an automated processing system. 
	Because of this, these messages are not displayed and will not be seen by any of our staff.  If you have questions/requests/comments/information, send us an eBay message or give us a call
	


	 Important Safety Advisory

	As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general 
	reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive, 
	type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while 
	driving. If you are not confident or familiar with the installation, please ask a trained professional for help. 

	

	 Before Purchasing

	- Measure your wheel gap for clearance. You will need at least 2.0" (50mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner.

	- The vehicle’s wheel studs need to be measured. If the studs are longer than 2.0" (50mm), it will extend past the spacer's surface.  It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.

	- If your vehicle does not have 10x1.25 threaded wheel studs, you would need to purchase the correct threaded lug nuts for proper installation.

	

	 Before Installation

	Check compatibility of spacer-to-hub, spacer-to-wheel, and lug nuts (thread pitch & seat type)

	

	 During Installation

	- Installation should be performed by a trained professional using proper tools.

	- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.

	- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle.

	- ALL Lug nuts MUST be torqued to manufacture specifications.

	
	 After Installation

	- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).

	- Inspect and re-torque ALL lug nuts after 25-50 miles of driving

	

	 Note: No returns or exchanges once product has been installed on the vehicle.
	
	

Fitment Information

	IMPORTANT - Please Read: Buyers MUST confirm their ATV/UTV Nut size is 10x1.25. These wheel spacers will not work with any other sized nut. Please verify this to prevent fitment problems.



Honda

1997-2009 Recon 250

1988-2000 FourTrax 300

1986-1987 FourTrax 350

1987-1989 FourTrax Foreman 350

2000-2009 Rancher 350

2004-2009 Rancher 400 (4WD)

1996-2006 Foreman 400 (4WD)

2004-2016 Rancher 420 (4WD)

1998-2004 Foreman 450 (4WD)

2005-2016 Foreman 500 (4WD)

2001-2016 Foreman Rubicon 500 (4WD)

2003-2007 Rincon 650

2006-2016 Rincon 680



Yamaha

1995-1998 Timberwolf 250

1999-2005 Bear Tracker 250

2006-2009 Big Bear 250

1996-2005 Big Bear 350 (2WD)

1987-2008 Big Bear 350 (4WD)

1987-2013 Big Bear 400 (4WD)

2005-2006 Bruin 250

2004-2006 Bruin 350

1995-2010 Wolverine 350 & 450

2007-2013 Grizzly 350 & 450 (4WD)

2009-2012 Grizzly 550 (4WD)

2007-2016 Grizzly 700 (4WD)

1993-2004 Kodiak 400 & 450

2005-2006 Kodiak 400 & 450 (4WD)

2004-2014 Rhino 450, 660, 700



Suzuki

2002-2007 Eiger 400

2002-2009 Ozark 250

2008-2016 King Quad 400

2001-2010 King Quad 450

2011-2016 King Quad 500

2005-2007 King Quad 700

2009-2016 King Quad 750

2003-2007 Vinson 500



Kawasaki

2006-2012 Brute Force 650i (4WD)

2005-2016 Brute Force 750i (4WD)

	

	For our spacers with a lip, your wheel centerbore must be equal to or larger than 74.1mm


	Some ATVs requires different bolt pattern front and rear spacers, please carefully read the above fitment guide


	Don't see your ATV above? Message us with the year/make/model of your ATV and we'll be glad to find a compatible spacer
	

Shipping Information

	
	 See eBay's "Shipping and Payments" tab for shipping cost and estimated delivery time.

	

	 Local Pick up / Will Calls - Not Available

	

	 NOTE for International Customers: Buyer is responsible for any import taxes and/or customs charges for the item. The amount may vary from country to country.
	

Legal Disclaimer