Genuine FTDI TTL-232R-5v diagnostic USB 1.8 metre cable that plugs into the obsolete OBD socket found on the 14CUX series ECU loom known as the "hot wire" used on many Rover V8 engined cars around the early 1990's, that gives all sensor data - Engine temp, fuel temp, speed, RPM, Voltage, Lambda trim, Throttle pot, AFM voltage, idle status, live fuel map display, fuel pump status, injector pulse width, and stepper motor position. It also has stepper motor control and fuel pump control inputs and a full range of ECU fault codes. Sensor data logging facility. If you are interested in mapping the fuel map display this will allow you to see the current load point, that can now be altered with software like Tuner Pro using a suitable Eprom emulator like the Moats Ostrich. This usb diagnostic lead is fitted with a new genuine lucas connector for years of trouble free use, that's a push fit into the 5 pin white TTS connector found in the loom. This simple cable will save hours of trouble shooting, garage trips, and guesswork for anyone running the 14CUX ECU MPI systems.
Please note a few ECU looms around 1990 do not have the TTS connector, and use a white square 6 pin connector.(typically used on the factory MGBV8), sorry this usb diagnostic lead will not work with this connector
Note: Download and extract the files to one folder on your hard drive. RoverGauge.exe must be run from within the folder, it can?t be run without the associated files. It will run without a cable if you want to see all its functions, but obviously won?t connect to the ECU. THIS WINDOWS ONLY SOFTWARE
This cable is NOT compatible with the P38 series V8 Range Rover fitted with the GEM's engine management system.
I AM ONLY SELLING THE DIAGNOSTIC LEAD, ANY PROBLEMS OR QUESTIONS WITH THE SOFTWARE
PLEASE EMAIL THE SOFTWARE DEVELOPERS OF ROVERGAUGE AS IT IS NOT MY SOFTWARE AND I CANNOT ANSWER ANY QUERIES ABOUT IT.
THE PICTURES OF THE DIAGNOSTIC LEAD ARE STOCK PICTURES,
THE DIAGNOSTIC LEAD YOU RECEIVE MAY BE VERY SLIGHTLY DIFFERENT THE
5 PIN SOCKET WILL BE EITHER WHITE BLACK OR RED
rovergauge
https://github.com/colinbourassa/rovergauge/releases/tag/0.10.0
https://github.com/colinbourassa/libcomm14cux/releases/tag/2.1.1
DRIVERS
Drivers for Windows and Linux for the FTDI USB DIAGNOSTIC LEAD
and the win vcp can be downloaded from here
http://www.ftdichip.com/Drivers/VCP.htm
ALL YOU NEED TO DOWNLOAD ARE THE WIN VCP
(VIRTUAL COM PORT) AND THE D2XX DRIVER
AND THE ROVERGAUGE SOFTWARE
I HAVE ALREADY TESTED THE LEAD WITH A LOOPBACK CONNECTOR
WITH THE "PUTTY" TERMINAL EMULATOR PROGRAM
AND USED THE FTDI FT PROG UTILITY TO INVERT THE POLARITY OF THE Rx LINE
FROM OVERSEAS I CAN ONLY ACCEPT PAYPAL
LOW START
NO RESERVE
HAPPY BIDDING