Information:
If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2.7L
Headlight Specification:
Plug Type: H7 (High Beam) + H7 (Low Beam)
Luminous Flux: 16000LM/set (8000LM/bulb)
Operating Voltage: DC 9-32V
If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2.7L
Headlight Specification:
Plug Type: H7 (High Beam) + H7 (Low Beam)
Luminous Flux: 16000LM/set (8000LM/bulb)
Operating Voltage: DC 9-32V
Wattage: 80W/bulb
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40 ~ +80 degree Celsius
Usage: Headlight
Foglight Specification:
Plug Type: H11/H8 (fog light)
Luminous Flux: 10000LM/set (5000LM/bulb)
Operating Voltage: DC 12-24V
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40 ~ +80 degree Celsius
Usage: Headlight
Foglight Specification:
Plug Type: H11/H8 (fog light)
Luminous Flux: 10000LM/set (5000LM/bulb)
Operating Voltage: DC 12-24V
Wattage: 50W/bulb
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: Fog light
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: Fog light
Package Included:
2pcs H7 Headlight High Beam Bulbs
2pcs H7 Headlight Low Beam Bulbs
2pcs H11 Fog Light Bulbs
The box is sent randomly
2pcs H7 Headlight High Beam Bulbs
2pcs H7 Headlight Low Beam Bulbs
2pcs H11 Fog Light Bulbs
The box is sent randomly
Advantage:
*Latest CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White CHUSYYRAY light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
*Latest CSP chip(USA) light source, 2 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White CHUSYYRAY light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
NOTE:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.