Stove and Fireplace Paint Log Burner Paint Hotspot Matt Black Various Sizes
Hotspot Black High Temperature Stove Paint is a non-clogging ultra-high temperature corrosion resistant finish specially formulated for use on wood or multi-fuel stoves, coal or log effect gas fires, grates, baskets, fire backs, barbecues, pipes flues etc.
Heat resistant up to 600°C.
This Stove Paint can also be used on brick, concrete and render. Most substrates including steel and its alloys can be coated successfully however, we recommend that each new substrate should be checked individually for its suitability.
Size: 100ml, 250ml and 500ml
Sprays: 150ml, 250ml and 450ml
1. Ensure surface to be treated is cool and fire is out.
2. Remove all rust, scale and dirt with abrasive paper and/or wire brush.
3. De-grease and check surface is dry before painting.
4. Ensure working area is well ventilated.
5. Stir paint until well mixed.
6. Brush thinly over surface, one coat should be sufficient.
7. Use only Xylene based thinners
8. Paint will be touch dry in 2-3 hours but, allow 24 hours before using near a fire
