Notes:
The compatibility table is only for reference, please make sure to verify the bulb type of your vehicle before purchasing. We are happy to help if you need any further information.

 

 

Headlight Specifications：
Plug Type: HB5/9007 ,High&Low beam
Power: 160W/set

Chip Type: COB chip
Luminous Flux: 16000LM/set(8000LM/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)

Wattage：80W/PC
Color Temperature: Pure White 6000K

Material: Aviation 6063 aluminum profile

IP67 rated water and dust seal,360 degree beam angle

Operating Temperature: -40-80 degree Celsius
Over 50000hrs lifetime
Usage: High Beam & Low Beam

 

Two-way heat dissipation channel：
1.All-in-one aluminum profile as heat conduction system,360 degree heat radiating
2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate

 

 

Foglight Specifications：
1. Plug Type: 881/862/885/889/894/898
2. Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
3. IP Rate: IP67
4. Chip Type: Bright 4-Side 8pcs CSP Chips
5. Beam Angle: 360°
6. Color Temperature: 6000K Super White

7.Luminous Flux: 8000LM/set(4000LM/bulb)

8.Wattage：50W/PC
9. Heat Dissipation Theory:  A380 Aluminum Heatsink
10. Operating Life: >50000hrs
11. Operating Temperature: -40 - +80°C
12. Application:  Fog Light
13. Number of Bulbs: 2
14. To Fit: Fog Lights KIt
15. Placement on Vehicle: Left,Right,Front

 

Package Content:
2x 9007 HeadLights High&Low Beam Bulbs
2x 881 Fog Lights Bulbs
New and old boxes are sent randomly

 

Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.