If you want great quality at a great price for your hot rodding project look no further.
Up for sale is a hand built weight relieved PJ Bass body with a flame maple drop top, full 1/4"! Ready for final sanding and finish application. Check out the Specs below.
The body pictured is what you will get.
NOTE: This is an unfinished body sanded to 220 grit and we have wetted the grain before taking the picture to show the figure as if it had finish.
Made in the USA by Sonorous Custom Guitars, with 13 years luthier experience.
********** Please read through entire listing before considering a purchase **********
Body wood: 2 piece Superior Alder
Top wood: 2 piece book matched flame maple
Total thickness: 1 & 3/4"
Top thickness: 1/4"
Weight: 4 lbs 5 oz
Edge roundover: 1/4"
Neck pocket: 2 & 1/2" wide, 5/8" deep, 3 & 7/8" long (EXACT dimensions) **Designed for necks with a scale length of 34" and 21 frets (or overhanging 22 fret) ONLY"
Neck plate: standard neck plate holes 2" by 1.5"
Chambered: yes, message for routes if needed
Comfort carves: arm contour and belly carve. (Heel carve available upon request. Shorter neck plate screws will be needed for the heel carve)
Bridge mount: Designed for Fender/Hipshot A and B style bridges with a screw mount spacing of .687" 5 screw mount or 3 screw mount
Distance from end of pocket to screw mounts: 11 & 3/32"
Pickup/Control cavity routes: Designed around Seymour Duncan standard specs for direct mount. Pickup cavity depth = 3/4" deep. Control cavities depth = 1.6"
Please use the above measurements as a guideline for your hardware to ensure fit. We took care to make sure this body is as universally compatible with most standard parts associated with this style of body but modifications may need to be made so check your parts!
FREE GROUND SHIPPING!
We reserve the right to change shipping carrier
International shipping through eBay global shipping program
Free FedEx home delivery to US. Alaska/Hawaii upcharge. 30 day returns accepted.
Made at isdntek PrettyBorders