Product description:

★The engraving machine is flexible, convenient and efficient, and can adjust the speed of the impact machine. It is suitable for jewelry, crafts, wrought iron and other industries and is a good helper for engravers.

★ Adjustable barometer can also adjust the stroke per minute. Suitable for a variety of materials such as wood, metal, precious stones and jewelry.

★ Foot pedal control allows you to free your hands, reduce fatigue and speed up production.

★ You are free to set the required pressure and speed, as well as the ability to switch between multiple handles.

★ 2 different handles, 4 cm round collet, triangle collet, (without shank / drill / burr) Use this tool to create any symbol, character or design you can think of.

Product specifications:

Condition: Brand new

color: blue

Input voltage: 220V

Power: 75W

Speed: 100-4000rpm / min

Air pressure: 0~3KG / CM2

Product size: 26X21X15cm

Packing size: 28 * 30.8 * 32.7cm

Weight: 8kg

The package includes:

1 X host

2 X manual engraving machine

3 X hose (2 hoses connected to the manual engraving machine, 1 hose separately)

2 X spring

1 X foot control pedal

1 X Instruction Manual

Instructions and maintenance:

Operation and adjustment methods:

(1) Close the pressure adjustment knob and the rotary handle switch to avoid damage to the pressure gauge and pressure relief valve.

(2) Turn on the power and turn on the power switch. (the indicator light is on)

(3) Set the rotary switch to the 1 or 2 position.

(4) Adjust the air pressure and speed, hold the engraving handle, step on the foot switch, slowly adjust the pressure knob, the pressure gauge indicates 1.5-2kg / cm2, and adjust the speed knob to adjust the two to make the engraving handle get the maximum impact, please Press the low pressure adjustment knob.

(5) Relax the foot switch, the engraving handle stops working, and then load the tool.

(6) Rotate the switch handle to positions 2 and 1, and switch the size of the engraving handle (should be turned to position)

(7) When using the rotary engraving handle, turn off the power switch, turn on the rotary handle switch, and then adjust the pressure button.

(8) When working, as the opening degree of the foot switch increases, the impact force can be smoothly controlled from small to large.

maintenance:

(1) After using the engraving machine for a period of time, the water in the decompression cup on the back of the machine should be drained.

(2) Add an appropriate amount of No. 10 mechanical oil to the size engraving handle.

(3) If a malfunction occurs, do not blindly disassemble, please check the repair by a professional.

note:

1. Manual measurement, please allow 3-5CM to be different.

2. Due to differences in display and lighting, the image may not reflect the actual color of the project. thank you for understanding.