Electric Handheld Tile Leveling Vibration Machine Wall/Floor Tiles Tool Hotsale
 Automatic Tile Leveling Machine Hand-held Tile Vibrator Tiler Machine USA STOCK
 
 
 
This product is suitable for wall tiles and small floor tiles: used for moving and installing floor tiles and wall tiles, which greatly improves work efficiency.

* Intelligent frequency control: multi-position adjustment
* Super absorbent capacity: 40kg super absorbent capacity, easy to paste tiles.
* One-click vibration, uniform force: the vibration frequency can be adjusted according to the size of the brick, the position of the brick can be corrected, and the efficiency can be improved.
* Battery life: Built-in 2500 mAh lithium battery, fast charging speed, long battery life.
* One-handed operation: stable and safe operation makes your work easier, suitable for both engineering teams and home use.
* Spring lock mechanism design: convenient and labor-saving.

Product parameters:
Power: 600W
Input: 110V / 60HZ
Output: 10.8V-12.8V
Battery capacity: 2500mAh
Lithium battery capacitor: 12VF
Charging time: 1-2H
Working time: > 8H
Vibration frequency: 0-150Hz / s
Adsorption strength: 40Kg
Suction cup diameter: 12cm / 4.7 "
Applicable tile: 100*100mm

Explanation:
1. Please check the battery before use to make sure the battery is fully charged;
2. Turn the inverter switch to the left to the minimum, and then start the machine as needed to adjust to a suitable state;
3. Place the machine on the tile to be laid, hold the suction cup, and then grasp the tile. Press the switch to start working and immediately flatten the protruding part of the tile.
4. When working, be sure to hold the suction cup to work on the tile, do not let the machine idle, and do not keep pressing the switch during the paste process, the rhythm is more conducive to paving.

Charging instructions:
1. After receiving the machine, press the switch to adjust whether the frequency switch works. If the light on the machine is off, please charge it before using it normally. When the charger is connected and charged, the charge indicator on the charger will light.
2. This product usually needs to be charged for 3-4 hours. It will stop automatically when fully charged, and the indicator light is green or off.
3. After fully charged, it can work for more than 8 hours, but in order not to affect the service life of this product, please charge it every day during normal use.
4. When using this product normally, you need to charge it once a day, such as not charging once a month.

Package Included:
1 x tiler
2 x battery
1 x charger
1 x storage bag
 
 
PushAuction


On May 7, 2024 at 19:49:35 PDT, seller added the following information:

DataCaciques