No shipping to UK!!!
ACA500Plus Gehäuse in weis 3D gedruckt!
Version bzw. Revision entnehmen Sie bitte Bild 11/12
Die ACA1234 passt hier ebenfalls mit hinein!BITTE PRÜFEN SIE VOR DEM KAUF DIE RICHTIGE REVISION IHRER ACA!!!
UND TEILEN SIE MIR DIESE PER NACHRICHT MIT!!!!
Bild 11 = Rev 2013-2018 und 2013-2021/2023
Bild 12 = Rev 2013-2016
Der Ein- bzw. Zusammenbau ist bei beiden Revisionen identisch. Am Beispiel der Revision 2013-2018 in den Bildern festgehalten!Das Gehäuse besteht aus 3 Teilen.
- Der Oberschale. Sie bietet Platz für den VGA Ausgang der Indivision ECS V2 sowie 2 Aufnahmen für die CF Karten. Außerdem wird die Aktivität der LED's an der Gehäuseoberseite dargestellt.
- Der Aufnahmeplatte für die ACA500 + inklusive 3 M3 Befestigungsschrauben und 4 M3 Senkkopfschrauben (TX9 (Torx)) zum Verschrauben der Grundplatte mit der Oberschale. Eine Turbokarte (als Beispiel in den Bildern eine 1230/IV) findet hier ebenfalls Platz. Die neue ACA1234 passt hier auch mit hinein!
- Einem Knopf für‘s ActionReplay
Es empfiehlt sich bei vorhandener ECS v2, diese erst nach dem Zusammenbau in den A500 einzubauen. Es geht auch andersherum, ist aber dann etwas fummelig ;)
Die Gehäuseteile werden miteinander verschraubt.
Die ACA500+, der A500, die Turbokarte, die CF Karten u. das Laminat sind nicht Gegenstand des Angebotes!
ACA500Plus housing printed in white 3D!
For version or revision, please refer to Fig. 11/12
The ACA1234 also fits in here!
PLEASE CHECK THE CORRECT REVISION OF YOUR ACA BEFORE BUYING !!!
AND TELL ME THIS BY MESSAGE !!!!
Picture 11 = Rev 2013-2018 and 2013-2021/23
Picture 12 = Rev 2013-2016
The installation or assembly is identical for both revisions. Using the example of the 2013-2018 revision captured in the pictures!
The housing consists of 3 parts.
- The top shell. It offers space for the VGA output of the Indivision ECS V2 as well as 2 recordings for the CF cards. In addition, the activity of the LEDs is shown on the top of the housing.
- The mounting plate for the ACA500 + including 3 M3 fastening screws and 4 M3 countersunk screws (TX9 (Torx)) for screwing the base plate to the upper shell. There is also space for a turbo card (as an example in the pictures a 1230 / IV). The new ACA1234 also fits in here!
- A button for ActionReplay
If you have an existing ECS v2, we recommend installing it in the A500 only after assembly. It is also the other way around, but is then a bit fiddly;)
The housing parts are screwed together.
The ACA500 +, the A500, the turbo card, the CF cards u. the laminate is not part of the offer!
No shipping to UK!!!