Equipped with a digital amplifier with high audio quality and high output
This unit has a 50 W+50 W (6 Ω/ohms) high-output class D amplifier. Full digital processing is used to perform all processes in the digital domain during playback of digital sources, eliminating external noise. Pattern minimizing is also used to achieve high-quality playback.
Adoption of a bi-amp system that realizes high quality audio
The low and high range speaker units of bi-amp compatible speakers are each driven by independent amps to eliminate interference and realize audio playback that is more faithful to the source.
Bluetooth OFF mode for highest sound performance
The Bluetooth OFF mode is used to turn off the Bluetooth function, as this function is a source of noise that affects sound quality. Suppressing this noise enables high sound performance playback.
Equipped with optical digital audio input, enabling connection with digital devices such as TVs
Connect this unit to digital devices such as TVs using the optical digital cable to enjoy audio from the TV and a variety of content in high audio quality. This unit also has an automatic playback function. When a device connected to this unit by digital connection is turned on, this unit automatically turns on and plays audio from the device.
Can be operated with the remote control of your TV
By learning the infrared signal of the remote control of your TV, you can operate this unit with the remote control of the TV.
Wireless connection with Bluetooth devices can be carried out easily
You can enjoy music simply by connecting wirelessly with your smartphone, tablet, PC, etc.
Supported with “Multi-Drive Connection” for simultaneous or switchable sound in 2 sets of speakers
Supports MP3 and WMA file CD playback
MP3 and WMA files that have been recorded onto CD-R or CD-RW discs can be played back on this CD player.
Plays USB memory devices (MP3/WMA/AAC/WAV/FLAC/Apple Lossless/AIFF/DSD).
You can play back audio files stored on a USB memory device by connecting the USB memory device to the USB port.
Headphone Amplifier Gain selector function
This unit has a gain control function with three levels that can be switched according to the characteristics of the connected headphones.
Equipped with auto standby mode function that reduces power consumption
CD player
Playable frequency response: | 10 Hz – 20 kHz |
Wow & flutter: | Below measurable limits (± 0.001 %) |
Sampling frequency: | 44.1 kHz |
Audio amplifier
Rated output: | 2-channel driving |
Dynamic power: | 60 W + 60 W (6 Ω/ohms, 1 kHz, THD+N 10 %) |
Output terminals: | Speaker: 4-16 Ω/ohms (impedance) |
Input sensitivity/impedance: | Analog In : 200 mV/30 kΩ/kohms |
Total harmonic distortion | Analog In: 0.1 % |
S/N ratio (10 W, 6 Ω/ohms, IHF-A): | Analog In : 90 dB |
Tone control: | DBB : +8 dB (100 Hz) |
Frequency response: | Analog In : 10 Hz – 40 kHz (±3 dB) |
[FM] | ||
Receiving Range: | 87.50 MHz – 108.00 MHz | |
Effective sensitivity: | 1.2 μV/50 Ω/ohms | |
FM Channel separation: | 30 dB (1 kHz) | |
FM S/N ratio: | Monaural : 65 dB | |
FM THD+N (1 kHz): | Monaural : 1 % |
Receiving Range: | 174.928 (5A) – 239.200 (13F) MHz |
Sensitivity: | –85 dBm |
S/N ratio: | 95 dB |
Communications system: | Bluetooth Specification Version 4.0 + EDR (Enhanced Data Rate) |
Transmission power: | Bluetooth Specification Power Class 1 |
Maximum communication range: | Approx. 30 m in line of sight∗ |
Used frequency range: | 2.4 GHz |
Modulation scheme: | FHSS (Frequency-Hopping Spread Spectrum) |
Supported profiles: | A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP (Audio Video Remote Control Profile) 1.5 |
Corresponding codec: | SBC, AAC |
Transmission range (A2DP): | 20 Hz – 20,000 Hz |
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
Clock type: | Power line frequency synchronized method (Within ±60 seconds per month) |
Alarm: | Alarm 1/Alarm 2: 2 types |
Sleep: | Sleep timer: Max. 90 minutes |
Operating temperature: | +5 ℃ - +35 ℃ |
Power supply: | AC 220 - 230 V, 50/60 Hz |
Power consumption: | 55 W |
Power consumption in standby modes : |
Standby modes | Setting items in the menu | Power consumption | |
---|---|---|---|
TV Auto-Play | Bluetooth | ||
Normal standby | Optical In 1/Optical In 2 | Off | 0.2 W |
Normal standby | Off | Off | 0.2 W |
Bluetooth standby | Optical In 1/Optical In 2 | On | 0.7 W |
Bluetooth standby | Off | On | 0.7 W |
Weight : 3.3 kg