4G Wireless Wifi Solar Power Video Camera Recorder + Extra Solar Panel 365 Days

Free Shipping on orders over £15

Same Day dispatch on in stock orders placed before 1pm

Returns accepted for your peace of mind

Description

2 Mega pixel 1080p high definition wire free battery and solar powered IP bullet camera with built in video recorder. Requires no wiring to power camera and can operate permanently on batteries alone. Charged by solar panel to keep working constantly even during dull/dark winter days. 8 hour dull daylight is all it requires to keep working all year round with additional solar panel. If camera is used excessively on live view this can reduce battery life and require charging after few weeks. Based on 30 minutes viewing each day and 15 activations camera can work all year round. Operates on app called uBox to iPhone/Android devices. Motion detection push notification and built in video record with microSD TF memory card (not included).


*Please note* - All 4G cameras require a compatible PAYG SIM card with data to operate. Recommended networks are O2, EE, Vodafone and Three. Network data fees apply, depending on usage. Average usage is approximately 2GB of data per month. Not all SIM cards are compatible, for example: some data only & smart cards may not work, so we provide a compatible Pay As You Go SIM card with your order.


Charge batteries before use, insert 4G sim card (if 4G not available camera works on 3G instead), download 'uBox' app to smartphone, connect camera to smartphone and start watching. Simple to follow instructions will have you up and running in minutes.


3.6mm high definition multi layer glass lens with wide angle 90º degree viewing. 2x invisible infra red night vision LEDs provide clear vision up to 20 metres. 2x bright white light LEDs for full colour night camera and security light. Built in microphone and speaker supports two way audio on your phone. 


Passive infra red (PIR) heat movement sensor controls camera to record and send notifications. Rapid 0.5s response time guaranteed to capture every movement even when running away.


Very Important Notice: We are based in UK and all items are shipped from our UK premises. Price includes 4x 18650 high powered lithium battery.


Look below at the simple installation and many different features you get with this camera.


1. download app - uBox to your phone or tablet device by scanning QR code on box or instructions.


2. Open box and remove camera, unscrew bottom panel with screwdriver provided. Inside is battery compartment, USB port, Reset on/off button, AP switch, 4G sim card slot (4g version only) and optional TF microSD memory card slot.

3. Remove protective plastic sleeve on each battery (if included). These will have some charge but may need charging before fully operational. Please note: genuine lithium batteries are expensive (£5 each) we highly recommend using our high powered 3.7v 3200mA 18650 battery. Additional solar panel is available for extra charge if built in solar panel and battery not sufficient when used excessively.


4. Screw on Wi-Fi antenna to rear of camera and insert TF microSD memory card (if required) from 8GB to 64GB maximum (Class 10 high speed minimum requirement). App includes icloud storage service with free trial and small service charge thereafter.


5. Red and Blue LED lights up on front of camera when powered up. To operate camera press and hold reset-on/off button until voice prompt is heard. Blue light only starts flashing ready for pairing camera to phone/tablet. Follow the prompts in app by tapping ‘add a device’. Next tap on setup WiFi device or 4G device. QR code is displayed on phone screen, hold up to front of camera lens to pair up. Voice prompt sounds when pairing is completed.


6. Replace bottom panel with 6x small screws and screwdriver supplied. Make sure they are tight being careful not to over tighten causing damage to screw thread.


7. Mount camera to wall using the bracket, screws and rawl plugs supplied. Observe the viewing angle and position before drilling holes for best result first time.


8. Any firmware updates and app settings can be applied to suit your preference. Standard definition (SD), High definition (HD), Memory card / iCloud storage, image flip, scene mode, detection sensitivity, active time, power frequency, LED indicator and device name.


Specifications


Main Chipset

Hi3518EV200

Camera Sensor

2MP CMOS sensor

Lens

90º Wide Angle 3.6mm

Video Stream

1920 x 1080p / 15fps

CMOS

Auto White-Balance, Auto Gain Control,

Auto Backlight Compensation

System

Lite OS

Standby

About 6 months

Additional Panel 12 months

D&N Switch

Double-Filter Auto Switch

IR Distance

850nm Infrared Ray,Effective 5M

Video record resolution

1920 x 1080p

PIR human Detection

10 metres

Audio Standard

AAC and G.726

Audio I/O

2 way speak / listen

microphone / Speaker

Record Management

Manual/Alarm Recording

Internet Protocol

TCP/IP,HTTP,TCP,UDP

SMTP,DHCP,DNS,P2P

Internet Wireless Standard

WIFI802.11b/g/n

Alarm

Motion detect record

Push Notification alert

Intercom Audio

Real-time Voice

Panoramic Mode

Digital 3D& Auto Cruise

Sleepy time

15S /30S/60S/No Sleep(Option)

PIR detection

10 metre

Low/Medium/High

sensitivity wake Phone APP

Power

Solar Panel

4pcs 18650 2400mA battery

USB 5V/1A

Solar Power

5.5V, 1.8W + 7.8W extra panel

Working Temperature

-10℃ ~+50℃

Working Humidity

≤80%RH

Packing Weight

920g

Packing Size

256*220*96mm/10.1*8.7*3.8in

Featured Categories

eBay Template Designed by: