Output power: 28 – 60 KW 2.3 – 5 kg/h
Power supply: single phase 230V ± 10% 50Hz
Motor: 0.75A 2850rpm 298rad/s
Motor starting capacitance: 4 uf
Ignition transformer: secondary 8kv 16mA
Pump: 7 – 15 bar
Power: 0.13KW
Model | 40G3 | 40G5 | 40G10 | 40G20 | 40G20S | |
Accommodation mode | ||||||
Output power | KW | 23.8/35.9 | 28-60 | 54-120 | 95-213 | 95-240 |
Mcal/h | 20-31 | 24-52 | 46-103 | 82-183 | 82-206 | |
Kg/h | 2/3 | 2.3-5 | 4.5-10 | 8-18. | 8-20. | |
Operating temperature | C Min./Max | 0/40 | ||||
Calorific value | Kwh/kg | 11.8 | ||||
Kcal/kg | 10200 | |||||
20C viscosity | mm2/s | 4/6 | ||||
Model | RBL | |||||
Pump | Flow (kg/h) | 30 | ||||
Atomization pressure | Bar | 8/15 | ||||
Light oil temperature | Max C | 50 | ||||
Fuel preheating | No | No | No | No | No | |
Draught fan | Model | Consequent fixed blade | ||||
Air temperature | Max C | 40 | ||||
Power supply | Ph/Hz/V | 1/50/23010% | ||||
Control box | Mode | RBL530SE | RBL530SE | RBL530SE | RBL530SE | RBL530SE |
Power | KW | 0.12 | 0.13 | 0.17 | 0.33 | 0.33 |
Rated current | A | 0.7 | 0.75 | 0.85 | 1.5 | 1.5 |
Protection level | IP | 40 | ||||
Motor power | KW | 0.9 | 0.1 | 0.14 | 0.3 | 3 |
Motor rated current | A | 0.7 | 0.75 | 85 | 0.15 | 0.15 |
Motor starting current | A | 2.5 | 3 | 3.5 | 6 | 6 |
Motor protection level | IP | 20 | ||||
Ignition transformer | Model | Into the control box | ||||
Operation mode | Intermittent Need to stop once every 24 hours |