• Great general purpose water valve for many projects
• 2-way, Normally Closed (energize to open, de-energize to close), unidirectional
  
• Very Fast acting
  
• Can be mounted in any position
  

• 3/8" hose barb inlet / outlet ports (for 3/8" inside diameter hose)
  
• Internal orifice diameter: 8 mm (about 3/8")
• Flow rate at 50 psi is >4GPM.
  

• 3 to 145 psi (not for gravity feed systems)
  
• Max media temp: 175° F (80° C)
• For use in pressurized systems only
  
• Note: most low pressure, high volume fountain type pumps do not work with these types of solenoid valves
  

• Water
• Low viscosity fluids compantible with valve materials
  
• DO NOT use with fuels
  

• 12-Volt DC / 450 mA
  
• Standard 1/4" spade connectors for electrical connection (connectors available in hardware stores, auto parts stores etc.)
• Wires can also also be soldered to the terminals
  
• No polarity requirements (connect positive to one termial and negative to the other)
  
• NOTE: We also carry this valve in 24VDC, 24VAC, and 120VAC voltages in our eBay store
  

• Valve body:  Nylon
• Plunger and plunger guide tube: Stainless Steel (300 and 400 series)
  
• Diaphragm:  NBR
• Diaphragm plate: Polyoxymethylene (POM)
  

• Height: 2-7/32"
• Width: 2"
  
• Length: 3-1/4"
• Weight: 4 oz

• If you are not completely satisfied, please contact us and we will make it right!
• 12 month warranty
  

Copyright © Ehcotech International Inc. 2017