Invision's LOW PROFILE ULTRA SLIM
CANTILEVER "TILT & SWIVEL " TV WALL BRACKET
SPECIAL DESIGN TO FIT NEW LED, LCD & PLASMA TV`S 26" to 42" Screens
.....PLEASE CHECK TV VESA COMPATIBILITY BEFORE PURCHASE.....
Why our product is leading the market
Only 46mm When Folded Flat to The Wall !!!
This mount is manufactured to the highest specification
Product Description & Compatibility
TV "VESA" Compatibility
The mounting holes on the back of your TV are referred to as the "VESA mounting measurements" these are the 4 small bolts holes on the back of your TV.
Please follow these 3 simple steps to ensure the bracket you are buying in the right one for your TV, it is also worth knowing your TV`s VESA mounting measurements can sometimes be found in the user manual.
Step 1. Measure the distance in millimetres from the centre of the top mounting hole to the bottom, this will give you your first VESA measurement e.g. 200mm
Step 2. Now measures the distance again in millimetres from the centre of the top hole across length ways to the centre of the next top hole, this will give you your second measurement.
Step 3. You should now have two measurements both in millimetres (mm) e.g. 200mm x 200mm etc; this is your TV VESA mounting measurements
1. The bracket in this listing is the vesa 200 version and covers, 100mm x 100mm, 100mm x 200mm & 200mm x 200mm If this is the right bracket for your TV please just click the "Buy It Now" button at the top of this page and continue to checkout. Thank you.
2. For this same bracket but in the vesa 400 version which includes additional VESA Adapter plates , covering VESA mounting holes 200mm x 300mm, 200mm x 400mm, 300mm x 300mm , 300mm x 400mm & 400mm x 400mm "PLEASE CLICK HERE"
to be redirected to our other advert. Thank you.
3. And finally for the bracket in the vesa 600 version, which includes the largest additional VESA Adapter plates, covering VESA mounting holes 200mmx 600mm, 300mm x 500mm, 300mm x 600mm or 400mm x 600mm "PLEASE CLICK HERE" redirected to our other advert. Thank you.
PLEASE CHECK YOUR TV`S MOUNTING HOLES BEFORE PURCHASE. THANK YOU.
"PLEASE CLICK HERE TO VIEW OUR CORNER MOUNT AV SHELF"
THIS BRACKET COMES COMPLETE WITH FIXING KIT
Strength & weight
The HDTV2-M TV Wall Bracket is made from 2.5mm thick reinforced steel box section and flat plate to ensure maximum strength and support, also the bracket is engineered in such a way so that the two cantilever arms are spaced apart nearly one inch more than other brackets of this nature, the bracket has been purposely manufactured in this way which is proven to provide more support to the TV and present less strain on to the wall, producing a far more ridged wall bracket. Each arm is securely fixed and pinned through to the 2.5mm back plate with M10 Alan key head bolts & lock nuts, then fully tightened to the wall using the 3.5 inch coach bolts provided. The HDTV-2M has been load tested to over 80kg in a controlled situation with no function failures, most TV`s up to 46 Inch rarely go beyond 20kg so the recommended maximum load for this bracket is 40kg. Please be sure to follow the fitting instructions included correctly, all safety and installation aspects are covered to help you successfully wall mount your TV bracket. The HDTV-M comes fully assembled and ready to install.
Unique features
Our bracket is the only bracket to classed as ultra slim in the cantilever range, as all other cantilever TV brackets currently selling on eBay cannot match the 5cm closed depth when folded away which gives a superior modern look and the effect the TV is professionally flat mounted when folded back to the wall, the HDTV2-M also offers 180 degrees of swivel movement left to right and can be easily tilted up/backwards 5 degrees and down/forwards 8 degrees with one touch of the adjustment leaver situated on the back of the front mounting plate, this allows the TV to be viewed from virtually anywhere in the room and optimises your viewing experience 100%. The cantilever arm can be fully extended to 500mm from the wall and has integrated cable management clips built in on the underside of the lower of the two cantilever arms, this bracket features the very best in bracket technology and will not be beaten on value for money for the latest spec slim line cantilever TV bracket.
SHIPPING
UK Mainland
We use
a 48hr delivery service to all our mainland UK customers (excluding
northern Ireland, Scottish highlands and all other offshore UK islands)
all items are fully insured and traceable. Our delivery service is by DHL and all orders placed before 11.00am monday to friday will be dispatched the same day.
Northern Ireland, Scottish highlands and all other offshore UK islands
Unfortunately all deliveries to the above locations will will incure a further £6.99 delivery charge, please can all buyers from these areas edit there delivery cost upon checkout. We will be unable to process any orders from these locations until the correct postage has been paid. Dispatch and delivery times are the same as above but sent via Royal Mail or Parcel Force.
Europe & Worldwide Delivery Service
"ORDERS ARE NORMALLY RECEIVED 2/3 WORKING DAYS AFTER PURCHASE,
PLEASE REMEMBER THERE IS NO DISPATCH OR DELIVERY ON WEEKENDS"
Returns & Exchanging Goods
Please Feel Free To Check Our Feedback From Just Some Of Our Many Happy Customers
Please Note: Orders placed before 9am Monday to Friday will be processed and dispatched the same day (except Bank Holidays)