This is an adapter to fit standard UK & European IBC Containers which normally have a 2" BORE, which is a 60mm Butress/Coarse Thread (measured thread edge to thread edge). More details on IBC fitment are below

It converts the S60 buttress IBC outlet thread (after the valve) to a more useful 3/4" (20mm) Hose Connection (Internal Diameter).  

This basic adapter to hose tail is also available in 1/2" (13 mm) and 1" (25 mm) versions. 90 degree angled versions of all 3 sizes are also available.

SEAL OPTIONS  

You have the OPTION of either the Standard Seals, The standard seals are made from Nitrile Rubber and are suitable for fuel oils and most non caustic (or mildly caustic) liquids. The VITON Seal offer superior chemical resistance and will for instance tolerate Hydrochloric acid up to 40%.  If you are not sure which seals you need, send us a message and we will try to advise you.

WILL IT FIT MY TANK?

These adapters will fit most standard UK and European IBC containers where the buttress thread is a coarse S60X6 thread. An S60X6 Buttress thread measures 60 mm across from thread edge to thread edge and has a 6 mm pitch (distance between the threads).

If your tank buttress is not an S60X6 (about 20% are not) you can purchase a Buttress Thread Converter which will convert the thread to the S60X6 you will require.  If you know the measurements of your buttress thread take a look at the “Buttress Thread Converters” Category which you can access from the home page.  If you are not sure send us a message and we will try to point you in the right direction.

QUICK TIP

When selecting the correct size of hose tail don't measure the OD (outer diameter) of your hose, you need the ID (inner diameter) that corresponds with the hose tail OD.  For example, if your hose has an internal diameter of 25 mm (1") you need to select the 25 mm (1") hose tail.