This is a brand-new and fully tested enhanced Dual Power (USB/AC) KEE EPROM EEPROM programmer, PCB version PCB5.0. This board has many enhanced features, such as built-in PLCC32, FWH / LPC sockets, thus NO NEED to pay extra to purchase these optional adapters. The PCB layout is fully optimized and the digital circuitry is separated from the power supply circuit, thus reducing interference. High precision digital switching ICs are used to control the Vpp circuit ( vs cheap regular transistor controlled), thus dramatically improves the burning accuracy and reliability by multitudes. Quality components are used, for example, the high current tolerant coil is used to boost the robustness of the circuitry. Optional higher Vcc voltages (5.6v and 6.2v) will be available when an external AC power supply is used. This is very important when you want to smoothly and reliably burn those old CMOS and even older NMOS EPROM chips. This programmer can also read and burn EEPROM, FLASH, and Microcontroller (MCS-51, AVR and PIC family) chips. We also added software support for more Winbond chips !
This ready-to-go package includes everything you need to get your project start rolling:
1. KEE EPROM Programmer Board, PCB version 5.0E, fully assembled;
2. Software and manual CD;
3. Optional DB25 and USB cable (If you need the cable set, just add additional $10 to the final price, we will gladly include it for you !);
For the USB version of this programmer, please check out my listing entitled "PCB6.0 USB EPROM Programmer BIOS, PIC, AVR ship from USA" at my other items!!
This Item is HERE in USA ready for IMMEDIATE delivery. As soon as your payment clears this programmer package is posted...
--- You will get it within a few days ---
We use USPS First Class mail service within USA, it usually takes about 2-5 working days to reach most locations within continental US. The spec sheet is listed below for your reference. Happy bidding !!
Device types supported
| EPROM | 27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040, 27C1001 M27C1001, M27C2001, M27C4001 27C080 (A19) , M27C801, M87C257 2716, 2732, 27C16, 27C32 2764, 27128, 27256, 27512, 27010 |
| EEPROM | 28C65,28C64, 28C128, 28C256,28C512, 28C010, 28C020, 28C040 M28C16A/17A (DIP28) (Adapter or Jumper) 28C16,XLS2816 (DIP24) |
| FLASH Memory | 28F64, 28F128, 28F256, 28F512,28F010, 28F020 MX26C1000, MX26C2000, MX28F1000, MX28F2000 Am28F256A, Am28F512A, Am28F010A, Am28F020A (New command erase/prog.) -- intel --- i28F001BX, 28F004, 28F008, 28F016 |
| FLASH Memory | 29F64, 29F128, 29F256, 29F512,29F010, 29F020, 29F040, 29F080 29F001,29F002, 29F004, 29F008, 29F016, 29F032 |
| Serial (I2C) EEPROM 24Cxx |
24C02,24C04,24C08,24C16, 85C72, 85C82, 85C92 --- page write ---- 24C32,24C64,24C128,24C256,24C512 |
| Microwire EEPROM |
<------ Data 8bit -----> (pin 6 ->ORG. [Schematic connect to GND]) 93C06, 93C46, 93LC46, 93C56, 93C57, 93C66, 93C76, 93C86 (8bit), AT59C11, AT59C22, AT59C13 CAT35C102, CAT35C104, CAT35C108 (pullup pin7) <------Data 16bit------> (pin 6 ->NC [No Connect]) 93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS) |
| MicroChip PIC |
16C84 , 16F84 ,16F84A , 16F627/16F628 |
| Atmel Flash Memory (Sector Programming) (Software Data Protection) |
AT29C256, AT29C512,AT29C010A, AT29C020, AT29C040,AT29C040A W29EE512,W29EE011, W29EE012, W29C020(128),W29C040 PH29EE010(W29EE011) ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020) |
| Atmel Flash Memory AT49Fxxx (Subset 29Fxxx) (Byte-by-Byte Programming) (Software Data Protection) |
Command seq. 5555/AA, 2AAA/55, 5555/A0 AT49F512, AT49F010, AT49F020, AT49F040 SST39SF010, SST3S9F020 ,SST39SF040 AT49F001,AT49F002 , AT49F008A Command seq. 555/AA, 2AA/55, 555/A0 Am29F512, Am29F010, Am29F020, Am29F040,HY29F080 29F002, 29F002T, Pm29F002T |
| Serial Peripheral Interface (SPI) EEPROM Mode0 (0,0) AT25xxx, W95xxx |
[Atmel] AT25010,020, 040 (A8-A0) AT25080, 160, 320, 640, 128, 256 (A15-A0) [ST] W95010....256, Microchip 25x010 - 25x640 --- Byte programming -- CAT64LCxxx (16bit DATA IN/OUT) use Socket 93Cxxx |
| Atmel EEPROM (page prog.) (Software Data Protection) |
AT28C256, AT28C010, AT28C040 |
| Nonvaltile SRAM (DS12xx) | DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB |
| static RAM (Test RAM) | 6116, 6264, 62256, 62512, 628128 |
| EPROM winbond,SST Electrical Erase Chip |
W27E512, W27E010, W27C010, W27C020, W27C040 SST27SF256, SST27SF512, SST27SF010, SST27SF020 MX26C4000 Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040 |
| Flash Memory SST,Sanyo | SST28SF040A ,LE28F4001 |
Adapters | |
| Atmel AT89Cxx (MCS-51) Adapter 32pin to MCS-51 |
Atmel Auto Setect AT89C51,52,55, AT89LV51,52,55 AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53 AT89C1051,AT89C2051,AT89C4051 (20pin) AT89C51RC (32KB), AT89C55WD (6.2V) SST89C54/58, SI89C52 Intel Auto Select i87C51, i87C51FA, i87C51FB ------------------------------------------------ i8xC51,i8xC52,i8xC54,i8xC58 (tWP = 100uS*25 Pulse) |
| Atmel AVR 8-bit RISC AT90Sxxx (Parallel programming) Adapter 32pin to MCS-51 |
(read,write,erase,verify,checkempty,Lockbits ,Fusebits) [Flash memory/EEPROM] AT90S1200,AT90S2313 90S2333, 90S4433, 90S4414, 90S8515, 90S4434, 90S8535 reference AT90S2313 pin Function Lockbit read AT90S2313 Errata Sheet.pdf |
| MCS-48,MCS-41 Adapter 32pin to MCS-48/41 |
ROM (read/verify) P8048AH, P8049AH,P8050AH, P8042AH Vea = 12V P8041, P8042 OTP (read/verify/Progam) EPROM (read/verify/Progam) |
| FLASH memory 8/16bit (Software Data Protection) Adapter (TSOP48) |
Am29F400,Am29F800,29F160,29F320 (read,write byte mode) HY29F200, HY29F400, HY29F800 , AT49F2048A, AT49F4096A, AT49F8192A |
| FLASH memory 8/16bit (Vpp12V) (Software Data Protection) Adapter (TSOP48) |
i28F200,i28F400,i28F800,i28F160 (TSOP48) 28F001(DIP32 or PLCC32) |
| EPROM 16bit (DIP40) (1-4Mbit) Adapter Eprom 16bit Eprom only |
27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002), Schematic by Toomas Toots (read,Program byte mode by use Resister pull up Data Bus (0xFF), A0 select low or high byte) |
| EPROM 16bit (DIP42) (4-32Mbit) Adapter Eprom DIP42 Eprom only |
M27C400(DIP40), 27C800, 27C160, 27C322 Schematic by Toomas Toots (read,Program byte mode by use Resister pull up Data Bus (0xFF), A0 select low or high byte) |
| FLASH memory 8/16bit (Software Data Protection) Adapter (TSOP48LV) |
29LV200, 29LV400,29LV800,29LV160,29LV320 (read,write byte mode) |
| Firmware Hub / LPC FLASH Adapter Firmware Hub/LPC (PLCC32) (PP mode) (3.3V) |
-- Firmware Hub 82802AB, 82802AC, AT49LW040, AT49LW080 SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A, PMC 49FL008T W49V002FA, W39V040FA -- LPC flash |
| P28F002BC Adapter P28F002BC (DIP40) |
BOOT BLOCK FLASH MEMORY - P28F002BC |