Send us a good quality close up photo, before ordering, of:
(a) Your existing hanger, back and front, preferably having removed from your bike & rear derailleur, OR
(b) A picture of the "cut out" where the hanger sits.
Don't forget to include details of your frame, particularly:
(a) Manufacturer, (b) Frame name / Derivative, (c) Year of manufacture i.e. Specialized, S-Works Epic Mountain 26", 2012
Send us this via the eBay messaging service and we will then get back to you as soon as possible!
Our Ref: CC016
Rear Derailleur Gear Mech Hanger Frame Saver
HARO RALIEGH KHS MARIN JAMIS, SCHWINN, BARRACUDA, CLAUD BUTLER, SHOGUN, FALCON
Available With Or Without Hanger Bolt
To fit the following models:
KHS
aka #73-079-105
1998 Alite 500, 1000
1999 Alite 1000
2000 Alite 1000, 3000
2001 Flite 500
2003 Flite 250
NORCO
2004- CRD 1, CRD 2, CRD 3
2003- CRD 1, CRD 2, CRD 3, CRR 1
2002- Carrera ladies
1998- VPS 2, VPS 3
1997- LOBOS
MARIN
aka hanger # 4
2002 – Shoreline Trail
Urban / city:
2001-04 – Larkspur
2003-04 – San Rafael
1999-04 – San Anselmo
1997-02 – Sausalito
1996-97 – Redwood
1996-02 – Point Reyes
2003 – Bear Valley
2004-07 – Lucas Valley
2002-06 – Mill Valley
2002 – Tiburon
2003-05 – Highway One
2001 – Hidden Canyon, Bayview 24"
1998 – Highway One
JAMIS
aka Jamis Part #12-6005
2007 – Fester 2.4
2006 – Fester
X 2.4 - 2011-2012
X.24 - 2009-2012
SCHWINN
2006 – Frontier alum, sport, FS
WHEELER
900 ZX, 2700 and others
DIAMONDBACK
2005-2006 Century
HARO
2000- Extreme
1999- Extreme
1998- Extreme, MX 3
1997- Extreme
Some RALEIGH models
Fits 2007 LOUIS GARNEAU LGS – RSR 4
May Fit some of the following frame types
RALEIGH
CUBE
BARRACUDA
CLAUD
FALCON
OPTIMA
SHOGUN
SARACEN
CHEVROLET
BUYER SUBMITTED HANGER MATCHES:
Claud Butler Chinook
-----------------------------------------------
FITTING NOTES:
** Rear Derailleur Hangers should be fitted by a Qualified Cycle Mechanic and only after the original fault that caused any original hanger to fail has been diagnosed and remedied.
Hangers are sacrificial parts designed to break when the frame and / or drive train are under undue stress, thus reducing / eliminating damage to the frame and drive train components.
FAILURE TO REMEDY FAULTS BEFORE REFITTING A HANGER WILL RESULT IN THE NEW HANGER PERFORMING ITS DUTY AND BREAKING.**
---------------------------------------------------------------------
PLEASE REMOVE YOUR HANGER AND OFFER UP TO THE PHOTOS SHOWN AND CHECK BEFORE ORDERING THANKYOU.
DONT FORGET A SPARE HANGER TOO!- YOU KNOW YOU'LL REGRET IT IF YOU DON'T!!
IF YOUR HANGER DOESN'T APPEAR IN THIS LISTING PLEASE REVIEW OUR OTHER HANGER LISTINGS, THEREAFTER MESSAGE US WITH A PHOTO AND WE WILL GLADLY ATTEMPT TO MATCH AND PRICE IT FOR YOU BY RETURN.
--------------------------------------------------------------------
TECH TIP:
Dont forget to carry a spare hanger on your bike and the tools to deal with it!
TECH INFO:
The derailleur hanger / mech hanger is the part of the dropout that the rear derailleur attaches to.
Most non-steel framed bikes have a separate removable derailleur hanger, generally made from aluminium which is bolted to the dropout. These are intended as a cheap replaceable part so that in the event of an accident or mechanical problem that could damage the derailleur or frame, the derailleur hanger breaks or deforms instead. Sometimes a shear bolt which is designed as a weak point will also be used. There are dozens of different derailleur hangers available and one model is seldom interchangeable with another.
In general, steel-framed bikes do not have a removable derailleur hanger, because a steel dropout and hanger is stronger and therefore less likely to be damaged, and also it is more malleable and less likely to work harden during deformation and generally can be bent back into shape without breaking.
It is important for proper indexed shifting for the derailleur hanger to be properly aligned. The rear derailleur bolt hole must be close to parallel with the rear axle. If it is out of alignment, the rear derailleur will not move far enough, with respect to the rear sprockets, with each click. A special tool exists to measure and correct misaligned hangers, referred to as A DAG - Derailleur Alignment Gauge.
-------------------------------------------------------------------------------
BUYERS OUTSIDE OF THE UNITED KINGDOM – IMPORTANT NOTICE
Buyers may pay import charges (including tax and customs fees) when purchasing items from another country. Import charges are generally based on the item's price, postage weight, dimensions, country of origin, and taxes, duties, and fees of the destination country.
Buyers should make their own enquiries and satisfy themselves as to the extent of any applicable charges before purchasing. Buyers should also determine any of the intended destination country’s import regulations.
----------------------------------------------------------------------------------
We are dedicated to ensuring the highest possible quality service to our customers.
Click to expand the tabs below to read more about our policies.
