Untitled Document
Quality valves from a real company — buy with confidence.
Best warranty and parts availability.
Ships within 1 business day from San Diego, California
Free shipping
General
1-1/4" NPT inlet and outlet ports
Normally Closed (N/C)2-way / 2-position valve
Pilot operated diaphragm valve with assisted lift (allows for higher flow rate in low pressure applications)
1-1/4" internal orificeCV = 24
|
|
Coil / Electrical
12-Volt DC (1.8 A)8" lead wiresCoil has 1/2" NPT Conduit Thread Other voltages:
24-Volt DC (link)
24-Volt AC (link)
110/120-Volt AC (link)
|
|
Pressure and Temperature
3 to 145 PSI (0.2 to 10 BAR)
265° F (130° C) Max Media Temp |
|
Valve Materials
Brass bodyStainless Steel internal components
FKM (Viton) diaphragm |
Suitable Media
Low Viscosity FluidsWaterAir, GassesDiesel, Gasoline etc. |
|
Dimensions
Height:
Length:
Width:
|
This is a great general purpose valve for almost any application requiring a 1-1/4" NPT valve . Like most diaphragm-type valves, this valve requires minimum differential pressure (3 psi) to operate. It is intended to be used in pressurized systems, not in gravity feed systems.
The coil is rated for continuous duty, which means that the coil temperature will stabilize at a safe level and will not continue to rise indefinitely. As with most continuous duty rated valves, the coil may still get warm or even hot during long activation periods. This is completely normal for most solenoid valves. If your application requires long activation periods, please contact us for additional advise.
Pipe thread sizes can be confusing if you are not familiar with the standard. The table below shows the most common NPT (National Pipe Thread) sizes, their equivalent outer thread diameters, and the number of threads per inch (TPI):
| |
Thread Size |
Outer Thread Diameter |
TPI |
| |
1" NPT |
1.315" |
11.5 |
| |
1-1/4" NPT |
1.660" |
11.5 |
| |
1-1/2" NPT |
1.900" |
11.5 |
| |
2" NPT |
2.375" |
11.5 |
We care about our customers. Please contact us if you need any help or tech support!
We carry repair kits and coils for most of our valves. Please contact us for pricing and availability.
Our warranty works without hassles. All replacements are quickly shipped from our warehouse in San Diego, California. You are responsible for the cost of shipping the defective item back to us; we gladly cover shipping cost back to you. If time is of essence, make sure to call us first. We understand that down-time can be expensive and we will do our best to work with you.
Please note that diaphragms and coils are considered "wear and tear" items and are not typically covered by the warranty.
If you are not happy with our products for any reason, you may return them for a full refund (excluding shipping charges) within 30 days of the purchase.
We work with Original Equipment Manufacturers (OEMs) on regular basis. Please contact us for OEM pricing and/or large quantity discounts.
