LED LOGO PANEL SWITCH

High quality LED light switch with Blue backlit led logo

OFF/ON Switch

The switch is black plastic with flowing curves and laser cut logo, (not cheap stick on logos) so will not wear off over time 

the Logo window is illuminated by a Blue backlit LED.
Rated as a 12v DC switch
Switching load is upto 20amp max at 12volts, we recommend this switch is used to switch on using a relay or low load devices to prolong the life of the switch, this is always advisable when using high load devices. example High power lights, LED light bars or motors


Suitable for all 12V/24V vehicles, such as car, motorcycle, buses, caravans and boats

LED color: Blue

Switch mode: on-off

Pin: 5

Material: ABS

Amperage rating: DC 12V 20A, DC 24V 10A

IP Rating: IP66

Installation hole dimension:    21.2 mm width, 37.2mm height
Full switch area required:   28mm width, 52mm height
Overall switch depth:  49.61mm, 37.8mm behind switch including terminals

~
This switch has Five connections at the rear of the switch
A:  Two earths for each LED
B:  One LED backlight
C: One Power input for the switch
D: One Power output

The switch can be fitted without a trim panel into most flat surfaces, this is providing the correct hole is cut and the thickness is less than 5mm

~

WE ALSO HAVE NEW SWITCH MOUNTS:


We have a very simple solution with our Switch Panel mounts. We have new Single or multiple Mounting panels available for these switches

Single switch mount: one switch on its own

Middle switch mount: used if using more than one switch.

End switch mount: used ether end left/right side off Middle switch mount.

~
Example: you have x4  switches to fit so you need x4 switch mounts,

x2 middles + x2 ends = 4 switch mount setup

Switch mount will fit to a hole with a maximum thickness of 4.5mm

Add 25.2mm for every extra switch you need to house

Example width required:
x2 mounts = 63.5mm
x4 mounts = 113.9mm
x6 mounts = 164.3mm
x7 mounts = 188.5mm



Please check our other great products by visiting our eBay shop.

 photo 2fbb2d66-2bd7-4beb-94be-5f0ad4c96941_zpson66ddqr.jpg


and BUY WITH COMPLETE CONFIDENCE this EXCELLENT STYLING ACCESSORY

 
CARD PAYMENTS ACCEPTED 

For our full business details please go to our [Business seller information] at the bottom of our eBay listing

[Our seller information confirms we are a "genuine UK located" tax paying seller located in the United Kingdom]
 

Look at our other plasma dials in our eBay shop