Send us a good quality close up photo, before ordering, of:
(a) Your existing hanger, back and front, preferably having removed from your bike & rear derailleur, OR
(b) A picture of the "cut out" where the hanger sits.
Don't forget to include details of your frame, particularly:
(a) Manufacturer, (b) Frame name / Derivative, (c) Year of manufacture i.e. Specialized, S-Works Epic Mountain 26", 2012
Send us this via the eBay messaging service and we will then get back to you as soon as possible!
Our Ref: CC003
REAR GEAR MECH DERAILLEUR HANGER FRAME SAVER DROPOUT
Hanger aka Type "K" / "DOK" / "L"
Avanti
Team Freeride -
Co-Motion
Hammerhead - 2008
Molotov - 2008
Molotov-2 - 2008
Peri Scope - 2008-2010
Roadster - 2008-2009
Robusta - 2008-2010
Torabora - 2008
Cube
AMS - 2004
ATS - 2003
ATS Pro, ATS Traffic - 2004
XC - 2003-2004
XMS05 - 2005
XMS06 - 2006
DaBomb
Molotov -
Molotov-2 -
Torabora –
ELEMENT:
2005 – Nitron–Q MD-9, Xenon-E MD-14
2004 – Elegant MD-9
Fuji
Belle - 2011-2015
Belle 1.1 - 2016
Belle 1.3 - 2016
Outland - 2007-2012
Outland 1.3 & 1.5 - 2013-2015
Outland 29 - 2010-2012
Outland 29 1.3 & 1.5 - 2013-2015
Panic - 2004
Panic 1.0, 2.0 - 2006
Panic Air, Pro - 2005
Reaveal 1.5 - 2015
Reveal - 2008-2012
Reveal 1.5 - 2014
Thrill - 2009-2010
IronHorse
Adventure Series - 2007
Bakuto - 2005-2006
Chimpira - 2005-2007
Hard Tail - 2007
Maverick - 2005-2006
Maverick 5.5 - 2005-2007
Maverick HT - 2007
Quantum ll
Race - 2005-2006
Sachem Hard Tail - 2007
Sachem HT – 2007
Transit 3.0
Warrior Comp - 2005-2006
Warrior Hard Tail - 2005-2007
Warrior Series - 2007
Yakuza - 2005-2006
Yakuza Series – 2007
Jeep
Cherokee
KHS
Alite 1000 - 2004-2011
Alite 2000 - 2005-2011
Alite 350 - 2011
Alite 500 - 2004-2011
K9 - 2007-2011
SixFifty 606 - 2010-2011
Tucson - 2010-2011
Yuma – 2011
Kona
Kula - 2001
Muni Mula - 2001-2002
Leader
Illuminati
Mondraker
2003-2005 Finalist
2003-2007, 2010 Ventura
2006-2007 Play 1 / 2 / 3 / 20 / 24
Mongoose
Comp - 2009
Tyax Super – 2009
Motobecane
600HT - 2012
Fantom 29 X7 - Prior to 2012
Norco
MAGNUM - 2013
MAGNUM LONG - 2012
MAGNUM SHORT - 2012
RAMPAGE - 2006
TORRENT – 2006
2006 – Evolve
2005 – Evolve
2002 – CRD 1, CRD 2, CRD 3, Ignite, Rage,
North Face
Yavapai
Rocky Mountain
Flow - 2008
Flow and Grind – 2007
SARACEN
Mantra, Raw-2
SE Racing
BM Flyer - 2005
Filth Flyer - 2005
X4 – 2005
Vassago
Most Frames
May Also fit some of the following Frames:
RED BULL
RIDGEBACK
EVOKE
Leader KSM
Sette Shadow
Planet-X jack flash
Tony Hawk
Le Tour de France
IBEX
2010 VENZO MX-2, FX-1
BH - montain bike trail Hunter 666
JEEP cherokee
KTM El-Paso& others
---------------------------------------------------------------
FITTING NOTES:
** Rear Derailleur Hangers should be fitted by a Qualified Cycle Mechanic and only after the original fault that caused any original hanger to fail has been diagnosed and remedied.
Hangers are sacrificial parts designed to break when the frame and / or drive train are under undue stress, thus reducing / eliminating damage to the frame and drive train components.
FAILURE TO REMEDY FAULTS BEFORE REFITTING A HANGER WILL RESULT IN THE NEW HANGER PERFORMING ITS DUTY AND BREAKING.**
---------------------------------------------------------------------
PLEASE REMOVE YOUR HANGER AND OFFER UP TO THE PHOTOS SHOWN AND CHECK BEFORE ORDERING THANKYOU.
DONT FORGET A SPARE HANGER TOO!- YOU KNOW YOU'LL REGRET IT IF YOU DON'T!!
IF YOUR HANGER DOESN'T APPEAR IN THIS LISTING PLEASE REVIEW OUR OTHER HANGER LISTINGS, THEREAFTER MESSAGE US WITH A PHOTO AND WE WILL GLADLY ATTEMPT TO MATCH AND PRICE IT FOR YOU BY RETURN.
TECH TIP:
Don't forget to carry a spare hanger on your bike and the tools to deal with it!
TECH INFO:
The derailleur hanger / mech hanger is the part of the dropout that the rear derailleur attaches to.
Most non-steel framed bikes have a separate removable derailleur hanger, generally made from aluminium which is bolted to the dropout. These are intended as a cheap replaceable part so that in the event of an accident or mechanical problem that could damage the derailleur or frame, the derailleur hanger breaks or deforms instead. Sometimes a shear bolt which is designed as a weak point will also be used. There are dozens of different derailleur hangers available and one model is seldom interchangeable with another.
In general, steel-framed bikes do not have a removable derailleur hanger, because a steel dropout and hanger is stronger and therefore less likely to be damaged, and also it is more malleable and less likely to work harden during deformation and generally can be bent back into shape without breaking.
It is important for proper indexed shifting for the derailleur hanger to be properly aligned. The rear derailleur bolt hole must be close to parallel with the rear axle. If it is out of alignment, the rear derailleur will not move far enough, with respect to the rear sprockets, with each click. A special tool exists to measure and correct misaligned hangers, referred to as A DAG - Derailleur Alignment Gauge.
-------------------------------------------------------------------------------
BUYERS OUTSIDE OF THE UNITED KINGDOM – IMPORTANT NOTICE
Buyers may pay import charges (including tax and customs fees) when purchasing items from another country. Import charges are generally based on the item's price, postage weight, dimensions, country of origin, and taxes, duties, and fees of the destination country.
Buyers should make their own enquiries and satisfy themselves as to the extent of any applicable charges before purchasing. Buyers should also determine any of the intended destination country’s import regulations.
----------------------------------------------------------------------------------
We are dedicated to ensuring the highest possible quality service to our customers.
Click to expand the tabs below to read more about our policies.