Eibach Pro-Kit Lowering Springs Kit

Dedicated for:
  • Peugeot 207 (WA_, WC_), 207 Saloon, 208 (CA_, CC_), 208 Box (CR_)

For detail vehicle specification see the corresponding table below.
Contains: 4 springs for front and rear axles.

The product images shown are for illustration purposes only and may not be an exact representation of the product.
Maximum Load Front: 1000 kg
Maximum Load Rear: 900 kg
Weight: About 9 kg
Reference: E10-70-010-01-22

Peugeot vehicle models:

Slide the table for more details
Series Models Years Engine kW/HP Lowering Front Lowering Rear
207 (WA_, WC_) 1.4 from 02.2006 Petrol 53/72 30 mm 30 mm
1.4 from 12.2007 Petrol 54/73 30 mm 30 mm
1.4 from 08.2008 Petrol 55/75 30 mm 30 mm
1.4 16V from 02.2006 Petrol 65/88 30 mm 30 mm
1.4 16V from 06.2007 Petrol 70/95 30 mm 30 mm
1.4 16V from 10.2009 Petrol 72/98 30 mm 30 mm
1.6 16V from 02.2006 Petrol 80/109 30 mm 30 mm
1.6 from 08.2008 Petrol 81/110 30 mm 30 mm
1.6 16V VTi from 02.2007 Petrol 88/120 30 mm 30 mm
1.6 16V Turbo from 02.2006 Petrol 110/150 30 mm 30 mm
1.6 16V Turbo from 10.2009 Petrol 115/156 30 mm 30 mm
1.6 16V RC from 02.2007 Petrol 128/174 15 mm 15 mm
207 Saloon 1.4 from 12.2007 Petrol 54/73 30 mm 30 mm
1.4 Flex from 11.2008 Petrol/Ethanol 60/82 30 mm 30 mm
1.6 Bioflex from 01.2008 Petrol/Ethanol 83/113 30 mm 30 mm
208 (CA_, CC_) 1.0 from 03.2012 Petrol 50/68 25 mm 25 mm
1.2 from 08.2016 Petrol 50/68 25 mm 25 mm
1.2 from 03.2012 Petrol 60/82 25 mm 25 mm
1.2 THP from 01.2013 Petrol 81/110 25 mm 25 mm
1.4 VTi from 03.2012 Petrol 70/95 25 mm 25 mm
1.6 from 03.2012 Petrol 88/120 25 mm 25 mm
1.6 from 03.2012 Petrol 115/156 25 mm 25 mm
1.6 THP 165 from 03.2015 Petrol 121/165 25 mm 25 mm
1.6 GTi from 08.2012 Petrol 147/200 25 mm 25 mm
1.6 GTi from 10.2014 Petrol 153/208 25 mm 25 mm
1.4 HDi from 03.2012 Diesel 50/68 25 mm 25 mm
1.6 HDi / BlueHDi 75 from 01.2013 Diesel 55/75 25 mm 25 mm
1.6 HDi from 03.2012 Diesel 68/92 25 mm 25 mm
1.6 HDi from 09.2016 Diesel 69/94 25 mm 25 mm
1.6 BlueHDi 100 from 01.2015 Diesel 73/100 25 mm 25 mm
1.6 HDi from 03.2012 Diesel 84/114 25 mm 25 mm
1.6 HDi from 04.2014 Diesel 85/116 25 mm 25 mm
1.6 BlueHDi 120 from 11.2013 Diesel 88/120 25 mm 25 mm
208 Box (CR_) 1.4 HDi from 10.2012 Diesel 50/68 25 mm 25 mm
1.6 BlueHDi 75 from 04.2015 Diesel 55/75 25 mm 25 mm
1.6 HDi from 03.2014 Diesel 68/92 25 mm 25 mm
Additional information for 207 (WA_, WC_), 207 Saloon, 208 (CA_, CC_), 208 Box (CR_):
  • Without levelling control.
  • Except vehicles with 4WD.
Please also read the common information below before placing your order.
Common information:
  • If not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
  • If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover)
  • The specifications indicated in the Components Certificate are for the classification of the item / vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \K\ in your vehicle registration certificate or to find at the type plate of your car!)
  • Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de
  • In case of non-conformance the items must not be fitted - please refer to your dealer.
  • Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available.
  • Mounting position - you can \read\ the mounting position of the springs from the imprint - have them installed just the way you read the imprint.
  • Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required.
  • Shock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs.
  • This already can be necessary from 40.000 kilometers OE-damper-milage.
  • The installation of Sport-Shock Absobers is recommended. As example Bilstein B8
  • Here all wheel/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.
  • Depending on engine, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given.
  • The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
  • The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded.
  • The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
  • If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.

The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It´s our legendary spring system that dramatically improves both a vehicle´s performance and appearance.

Pro-Kit lowers your car´s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

Product is unused, original and fully worthwhile. Picture for illustration purposes only - actual kit may differ from shown.

Payment

You can use PayPal to make online purchases.

Shipping

We ship world wide by GLS, UPS and national post operators - please ask for quotation for delivery to your country.

Contact

Feel free to ask us. You can send a message.