Slick-Coat can be used on - Snow Plows, Lawnmowers, Dump Beds, Excavator Buckets, Air Boats, Snowmobiles, Quads, Sleds, Metal Roofs, Mower Decks, Dumpsters, all metals and plastics.
Is it a lubricant?
|
| NO, it's NOT a silicone spray,
graphite spray, Teflon® spray
or plow wax but an advanced, 2-part,
non-stick, slippery, polymer coating that cures into an extremely hard and durable coating. If used on a snowplow, one coat can last an entire snowplowing
season. |
| |
| Is it the same as silicone, Teflon®
or Pam®? |
| NO, not even
remotely close. Slick-Coat is
the ONLY one-time per season, non-stick, engineered snowplow coating on the market today! In fact, it is so slick and slippery, it will put any other snowplow paint or coating to shame! |
| |
| Why is it so slippery? |
| Slick-Coat is extremely non-stick, slick
and slippery because it
chemically bonds to your snowplow and
produces the hardest, slickest surface
available. The finish is completely resistant
to salt, snow, ice and grime and
keeps your expensive plow working BETTER than new. |
| |
| Do you have to keep applying Plow-Slick? |
| NO, because it is an ultra-slick, industrial coating, only 1 application per plowing season is needed for incredible, non-stick performance! |
| |
| How long does it take to apply? |
| Slick-Coat only takes about 30 minutes
to apply on a clean plow
and then it needs to dry for 48 hours. After that, your plow
will have a
diamond-hard slippery finish that NO plow wax, silicon spray or Teflon® spray
can provide. |
| |
| Can it be applied in cool
temperatures? |
| YES. once mixed, it will dry at
temperatures in the low 40's and still give you the ultra-slick and slippery finish that you and your snowplow
will love. This makes using Slick-Coat a very easy application that can be done
in any garage. |
| |
| How is it applied? |
Slick-Coat can be brushed, rolled or
sprayed on your plow, dump box or truck bed. We mostly recommend using a non-shed 1/4" nap roller, and brush, to
apply the super-slick coating. You can even use an automotive type (or Wagner) paint sprayer.
|
| |
| Do I need to spray any lubricants on the coating? |
| NO, actually snowplow lubricants can attract dirt and should NOT be used on
the super-slick, non-stick coating. |
| |
| Can it be applied to my shovels? |
Absolutely, why not
make a hard job much easier?
Slick-Coat is so slippery and non-stick that you will want to use it
on every shovel you own. In fact, a 1-plow kit of contains
enough coating to cover a few shovels as well as your plow! |
| |
| Can I use it in my dump box? |
YES, it will repel snow, ice and
salt build-up and mud. from your dump box and makes the metal completely resistant to the corrosive damage caused
from salt.
Slick-Coat has also been tested against corrosion from salt spray
for over 5500 continuous hours with no signs of corrosion! |
| |
A One-Plow (12 ounce) Kit will cover one (8'6"- 10') plow on the front side if rolled on and will cover the front and back if sprayed. This equates to 40 square feet if rolled or 60 if sprayed.
Let dry for 48 hours at 45 degrees or warmer, and your good to go!
Slick-Coat is available in Safety Red, Safety Yellow or Clear and can be applied over all metals or plastics.
Quantity Discounts are available for Municipalities and large landscape contractors.
|
|