|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spacer Thickness: 15mm & 20 mm
Vehicle bolt pattern: 5x120 mm
Wheel bolt pattern:5x120 mm
Thread Size:12x1.5
Shank Length (15mm Spacers): 40mm
Shank Length (20mm Spacers): 45mm
Hex Size: 17mm
Seat Type: Cone Seat
Torqued Down By Hand At: 70-80 FT/LBS
Hub Bore: 72.56 mm
Number of Pieces: 4pcs
BMW (2011+ BMW 3-Series, 5-Series could have M14x1.25 Studs, NOT FIT, Verify before ordering)
1 SERIES (E82, E88) - 128i, 135i, M1, 1M COUPE
3 SERIES (E36) - 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3/
SERIES (E30) - M3 3 SERIES (E46) 323ci, 323i, 325ci, 325i, 325xi, 328ci, 328i, 330i, 330xi, M3
3 SERIES (E90, E91, E92, E93) - 325i, 325xi, 328i, 328xI, 330i, 330xI, 335d, 335i, 335ix, 335xi, M3
5 SERIES (E28, E34) - 525i, 525xi, 528e, 530i, 535i, 535is, 540i, M5
5 SERIES (E60, E61 2004-2010) - 525i, 525xi, 528i, 530i, 535i, 535xi, 545i, 550i, M5
6 SERIES (E24, E63, E64) - 633I, 635I, 645CI, 650I, M6
7 SERIES (E23, E32, W38) - 730i, 730il, 733i, 735i, 735il, 740i, 740il, 750i, 750il
8 SERIES (E31) - 840ci, 840i, 840ci, 850i
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is that it moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are used when the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
How long can you drive on a spacer wheel?
around 50 miles
Usually, the maximum speed you can drive on a space saver wheel is 50mph, and although there is no official restriction on the distance you can travel using one, around 50 miles is generally deemed to be the maximum safe distance for usage.
Picture Shop Category |
4Pcs (15mm & 20mm) Hub Centric Wheel Spacers 5x120 W/ 12x1.5 Cone Seat For BMW
Vehicle bolt pattern: 5x120 mm
Wheel bolt pattern:5x120 mm
Thread Size:12x1.5
Hex Size: 17mm
Seat Type: Cone Seat
Torqued Down By Hand At: 70-80 FT/LBS
Number of Pieces: 4pcs BMW (2011+ BMW 3-Series, 5-Series could have M14x1.25 Studs, NOT FIT, Verify before ordering)
1 SERIES (E82, E88) - 128i, 135i, M1, 1M COUPE 3 SERIES (E36) - 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3/ SERIES (E30) - M3 3 SERIES (E46) 323ci, 323i, 325ci, 325i, 325xi, 328ci, 328i, 330i, 330xi, M3 3 SERIES (E90, E91, E92, E93) - 325i, 325xi, 328i, 328xI, 330i, 330xI, 335d, 335i, 335ix, 335xi, M3 5 SERIES (E28, E34) - 525i, 525xi, 528e, 530i, 535i, 535is, 540i, M5 5 SERIES (E60, E61 2004-2010) - 525i, 525xi, 528i, 530i, 535i, 535xi, 545i, 550i, M5 6 SERIES (E24, E63, E64) - 633I, 635I, 645CI, 650I, M6 7 SERIES (E23, E32, W38) - 730i, 730il, 733i, 735i, 735il, 740i, 740il, 750i, 750il 8 SERIES (E31) - 840ci, 840i, 840ci, 850i 1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide. 2. Measure the fender gap and stock bolt length to choose suitable thickness. (For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.) 3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle. 4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker. 5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE) What are common problems with wheel spacers?
The main issue with a wheel spacer is that it moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are used when the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
How long can you drive on a spacer wheel?
around 50 miles Usually, the maximum speed you can drive on a space saver wheel is 50mph, and although there is no official restriction on the distance you can travel using one, around 50 miles is generally deemed to be the maximum safe distance for usage.
![]() WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
![]()
Copyright of eccppautoparts. All rights reserved. |