PVC plastic floor heat welding tools,1600w hot air plastic welding gun
Can
also be used for hot forming, shrinking,drying,igniting and
othoperations. Applicable to welding PE,PP,EVA,PVC,PVDF,TPO variety hot
melt plast.constant temperature controlled and continuously adjustable.
Heating melt seam sealing gun with an Chinese heating element is double insulation.
Technical Data
Voltage
120/230v
Power
1600w
Frequency
50/60Hz
Temperature
30-700°C steplessly adjustable
Air volume
Max 180L/Min
Air pressure
3000Pa
Noise level
Less than 65 db
accessories:
+5mm round nozzle
+5mm round speeding welding nozzle
+slotting knife
+slotting knife blade
+ moon knife
+butterfly plate
+Utility Knife
+Small hook blade
+Scraping rubber sheet
Both 110V and 220V have stock, please leave us messege which one you
prefer, otherwise we will send according to your country regular voltage,
thank you
Cautions
1) The voltage rating stated on the tool must correspond to line/mains voltage.
2)
For personal protecting on the building site, we strongly recommend the
tool be connected to a GFCI (Ground Fault Circuit Interrupter) or a
RCCB ( Residual Current Circuit Breaker)
3) The tool much be operated with supervision, heat can reach combustible materials which are out of sight
4) Protect tools from damp and wet
Plastic welding heat gun service object:
Welding
plastic synthetic rubber, asphalt plates, tubes, profiles sealing tape,
coating fabric, film, foam plastic, ceramic tiles and plastic flooring.
Pairs of PVC, polyethylene, polypropylene, and modified bitumen
membrane, plastic sheets and plastic coated and other materials can be
welded.Practical application of plastic welding heat gun:
1.
PVC, PP-R, PE plastic sheet, plastic pipes, plastic tanks, plastic fuel
tanks and other processing, mineral water barrels, jerrican and other
maintenance.
2. Plastic waterproof roof installation, repair.
3. Plastic floor welding and maintenance.
4. Large-scale advertising fabric welding and fixed, advertising paper removal.
8. Car bumpers, plastic decorative edge maintenance.
9. Tarpaulin welding and maintenance.
10. Environmental protection, pharmaceuticals.
11. Highways, reservoirs, water-proof.
12. Electron fixed, circuit board welding
There are many reasons for you to chose Bosite brand hot air products
1)
For the quality we will provide our customers high quality plastic
welding tools, you can rest assured that HLT will only use the best raw
material for our products.
2)For
the price, we will provide you a very resonable and competive price. we
have almost the same quality with German and swiss products ,but our
price is much more competitive
3)For the delivery, we can ship the goods in time with the lead time we promise
4)For the after sales service, We will try to provide the best service to you.
Heating System is with one year warranty (Exclude heating core
component) Electric spare parts are with one year warranty (Theseparts
are offered with the machine) Motor is with 3 years warranty
The advantage of our heat guns
Our
larger impeller blades are made of nylon66+40% glass fiber,it is really
heat resistant material, it won't melt under high temperature of 180
degree,Our larger impeller blades increase the transmission of air flow
across the heating element, with a larger total volume of air,(285 l/m).
This speeds welding production times and welds up to a 2" wide seam
with one pass.
The
superior motor features high temperature bearings and carriers made
from heat reducing alloys that disburse heat to keep the motor
components cool. The machine balanced spindles reduces vibration
resulting in the smoothest operating hand gun on the market today. As
added safety precaution,Bosite has double insulated all wiring and added
a third wire to the motor itself for grounding, further reducing the
potential for electric shock.
On Nov-11-16 at 07:53:30 PST, seller added the following information:
On Apr-19-17 at 23:58:51 PDT, seller added the following information:
