WESTERN LARGE SILVER HALTER PLATE .050" EXTRA THICK*, SCALLOPED OR NOTCHED, CUSTOM ENGRAVED, 4 1/4" x 3/4" 
*For a thinner, 4 1/2" x 3/4", Notched, solid nickel silver plate, .020", please see listing # 292452701360.

TO ORDER: 
Please add your preferences in the Notes to Seller section. 
(NOTE: ALL of the following information (1-5) is required when ordering. Any omission will result in a delay of your order.)  
(Charges for a second line and/or any other extras will be billed, via Paypal, in a separate invoice.)

1. Specify which RIVETS or CHICAGO SCREWS you want:
NOTE: Fasteners are NOT included except where specifically noted. See below for ordering fasteners of your choice.
  • 1/4" Rivets ($1.95 EXTRA*) used for 1-ply (single layer) leather OR 2-ply (double layer) nylon
  • 3/8" Rivets ($2.75 EXTRA + shipping*) used for 2-ply (double layer) leather OR 3-ply (triple layer) nylon 
  • 1/2" Rivets ($2.75 EXTRA + shipping*) used for 3-ply (triple layer) leather OR 3-ply + (triple layer) nylon 
  • 1/4" Chicago screws ($2.99 EXTRA + shipping*) used for 2-ply (double layer) leather OR 3-ply (triple layer) nylon
  • 3/8" Chicago screws ($2.99 EXTRA + shipping*) used for 3-ply (triple layer) leather OR 3-ply + (triple layer) nylon
(Even if you are not ordering fasteners, we still need to know what size hole to provide)

* Unfortunately, when rivets and Chicago screws are ordered, increased USPS rates (as of 1/21/2018) apply:
Chicago screws and longer rivets must be shipped as a First Class parcel, (with tracking number) and incur a discounted shipping charge of $4.99. (Billed through PayPal via a separate invoice)
We are NOT making any profit from these charges.

2. Specify Notched OR Scalloped. (Please see our photos)

3. Specify one or two lines of engraving.
  • A second line is $3.00 extra (Billed through PayPal via a separate invoice)
4. For EACH line, write text exactly as it is to be engraved.
  • Write text as it is to be engraved for EACH line. (Specify all HIGH CASE OR Upper and Lower case)
  • We will engrave in all HIGH CASE (all caps) unless otherwise requested, except for script and Olde English which will be engraved in Upper & Lower unless all HIGH CASE is specifically requested. 
  • Do NOT use quotes ("), unless they are to be engraved.
  • Maximum of 25 characters, including spaces, on the first line.
5. For EACH line, Choose a font from photo 8: 
  • SIMPLE BLOCK (SB)
  • SIMPLE BLOCK ITALIC (SBI)
  • FOUR LINE BLOCK (FB)
  • FOUR LINE BLOCK ITALIC (FBI)
  • ROMAN BLOCK (RB)
  • ROMAN BLOCK ITALIC (RBI)
  • CLARENDON (C)
  • CLARENDON ITALIC (CI)
  • SIMPLE SCRIPT (SC)
  • SLANT SCRIPT (SS)
  • CENTURY BLOCK (CB)
  • OLDE ENGLISH (OE)
(We offer Script and Olde English in upper & lower case only, unless by special request.)

NOTES:
  • Maximum of 25 characters, including spaces, on the first line. A second optional line is $3 extra which will be billed, via Paypal, in a separate invoice. (We can usually accommodate a few more letters on the 2nd line.)
  • The first line is usually a bolder, more prominent font, while an optional second line is usually slightly smaller. The choice of font represents such, e.g. 1st line Roman Block (RB), 2nd line Simple Block (SB).
  • (Charges for a second line and/or any other extras will be billed, via Paypal, in a separate invoice.)
  • IMPORTANT: Check your eBay messages frequently. If we don't receive a response from you to any questions we may have about your order before the eBay ship-by date, we reserve the right to make our best judgement as to layout, colors fonts, case, and/or size, in order to meet those shipping requirements.
******************************************************************************************************

DESCRIPTION:
A beautiful, thick, finest quality brushed satin, solid nickel silver, custom engraved name plate, one line engraved (included), showing your horse's name, your name or initials etc., to mount with rivets or Chicago screws* (See #2 above for pricing). The dimensions are a 4 1/4" x 3/4" , (with a .050 thickness, almost a quarter!).

These plates are finished with a baked-on synthetic resin, that will not tarnish or rust. They are sturdy, and create an elegant finish for your halter. We rotary diamond burnish the name six times into the brass, to create a very durable engraving, much more so than just diamond etching or laser engraving, that has a tendency to rub off. The exposed raw nickel silver is then acid oxidized to produce the darkened text.

Perfect for identifying your horse's lineage, owner, phone number, etc. with an optional second line ($3 extra). They are finished with a baked-on synthetic resin, that will not tarnish or rust. They are extremely sturdy and create an elegant finish to the halter. They can also be used for mounting with rivets to leather belts, bracelets and key chains.

Please be double sure to check your order before submitting and include a phone number to reach you, if we have any questions. 
Please ask all questions before purchasing!

If you are ordering more than one, please place your orders separately, to avoid confusion.

INTERNATIONAL SHIPPING:
We are no longer shipping large rivets or Chicago screws internationally, as this quadruples your shipping charge!!
We are NOT responsible for customs duty, taxes and fees, etc., or any delay that might be incurred from them.

Thank you for your order. We have been in business since 1984, previously as Endless Creations, now as Endless Etc LLC, (endlessetc.com), with many satisfied and happy customers. We have attended many prestigious horse shows across the country, over the years, so whether you're an 'old' customer, or a new client, we welcome you to experience our high standards of workmanship and service. We aim to please!
 
Endless Etc. LLC

Please see our other eBay listings for bridle tags, brow, saddle and other halter plates, a leather key chain with name plate, stall signs and holders.

Thank you!