Description: This is a 1/3 HP Permanent Magnet DC Motor with Solid State Electronic Variable Speed Control. Here are the specs: - 1/3 HP Permanent magnet DC motor
- 1480 to 5400 RPM no-load speed range (as measured with a digital tachometer with control powered at 122 volts)
- Clockwise rotation (facing end of motor shaft)(rotation can be reversed by switch power leads inside control)
- TEFC (totally enclosed fan cooled)
- 2 Mounting options on motor face as follows:
- (4) Screws on the motor face in a 2-5/32" (55mm) circle 90 degrees apart
- (2) Openings on motor mounting bracket approximately 3-3/4" (95mm) apart to accept up to 5/16" (8mm) diameter bolts
- 5/16" (8mm) Diameter x 1-3/4" (45mm) long output shaft with flat for set screw
- Motor body is 3-1/32" (77mm) diameter x 6-1/16" (154mm) long
- DC Motor control (solid state)
- Input power: 110 Volts / 2.3 amps / 1 Ph / 60 Hz
- Controls motor speed from approximately 1480 no-load RPM (slightly delayed soft start) to 5400 no-load RPM (when powered at 122 volts)
- Control box measures 5-1/8" long x 3-1/8" wide x 2-3/8" deep
- With safety switch, variable speed control knob, built-in resettable circuit breaker, and fuse (plus extra fuse)
- Heavy duty 6 ft grounded cord
- Screws included to mount control box and motor
- Motor produces its best torque in the top half of its speed range
This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/3 HP variable speed drive. This system is brand new but will come in generic packaging. Please study the pictures and email with any questions. Thanks for stopping by. FAST SHIPPING INCLUDED IN THE USA.
PLEASE NOTE: We sell 2L pulleys and belts that fit this motor and help to reduce its speed.
Safety Note: It is the buyer's responsibility to determine if this high speed motor is suitable for your application, to mount it securely, and to operate it in a safe manner. Failure to do so may cause injury.
Shipping weight is 6 lbs. |