If you have a need to pump water "continuously"..this pump Can and Will pay for itself in electrical $avings, often in less than a year!  This pump is manufactured specially for moving High Volume flow rates  of water at low water lifting heights for applications such as water falls, pond water transfer, etc.

 

 We believe this MaxiFalls 7000 GPH pump to be the most efficient of it's size in the world of anything pump available under a couple thousand dollars and their life expectancy is phenomenal averaging many years even in 24/7 CONTINUOUS USE!!

 

 

   This AUCTION INCLUDES: THE PUMP AND A SET OF (2) UNION ADAPTERS FOR USE WITH STANDARD 2 INCH PVC PIPING!  Other optional items ALSO AVAILABLE (Leaftrap priming pot, Flow control valve, etc)   - may or may not be needed for your installation or use - please see below for more details on pump options.  BUY with us & $AVE bigg on this pump, we are the largest retailer for these in the USA!!!

 

 MaxiFalls ,  7,000 gph WATER PUMPS AT THE BEST PRICES IN USA!!!  AND  FAST SHIPPING TOO!   PERFECT FOR: Waterfalls, ponds, fountains & other continuous water circulation needs!  

External applications only (Non-Submersible).….. hence, their Hi Efficiency & Long life!  

SPECS:

 *Operates on 115volts  DRAWS JUST 2.9 amps!!!!! (220/230 Volt AC  50/60hz models are available upon request at no additional charge.   **Note: A.O. Smith Electric Motors has sold out and thus Motor style OR color may vary from photo shown.  We use only Top Quality motors.  Full Warranty honored directly though us applies to the entire wet end pump unit & motor.  Some motor options may now be assembled or made in Mexico and these issues are obviously beyond our control.  Please feel free to contact us with any specific questions you may have - WE ARE OPEN DAILY 10am-6pm central time!!!

*7,000 Gallon per Hour max Flow!  (also other: 11,000, 9,000, 7,000 & 17,000gph maxifalls & superfalls Pumps available IN STOCK!! - email for details or see our "Other Items")

*Oil Free Motor & Nearly SILENT Operation!

*Up to 14 ft max head  (You may LIFT or PUSH water this high, or any combination of lift & push - NOT to exceed 14 feet total (which is the shutoff point!)  Best applications are installations with 2ft to 12 feet maximum head.)  Perfect for Waterfalls, Outdoor Ponds & other High Volume low pressure water transfer needs. 

  If you need to lift water OVER 14 feet, we do offer the MaxiFalls 7000 "PLUS"  pump which will do these same high volume flows at up to 35-40 feet of head.  (*the MaxiFalls"PLUS" option pumps are available upon request for $79 additional cost)

You can "push" water hundreds of feet laterally.  The "lift" (also known as "head") is the distance from the TOP level of the water being pumped from to the distance above this that the water is being raised and released.   To achieve Maximum performance from these pumps - your plumbing should be "efficient" (of proper diameter of 2" or larger, eliminate any unnecessary 90 degree elbows and replace with 45 degree elbows, or "Sweep" elbows which are elongated to decrease friction loss.  FYI: One (1),  90 degree "tee" fitting has the same friction equivalent to 17 extra feet of pipe!   Whereas a gradual turn from flexible piping or from a sweep type elbow is equal to about 5 feet of pipe.   As you can see a few extra dollars spent on pvc pipe for an efficient plumbing setup can pay off dramatically.  

You can run this pump 24hrs a day..............Continuously for a month for about $15-$18 dollars in electricity!!  These pumps have been used for replacements of in-efficient swimming pool type pumps that can cost $100 to $175 per month to operate!!   If you're pumping water continuously - these pumps CAN & WILL Pay for themselves quickly!

With nearly silent operation and extremely long life these pumps are a choice you cannot afford not to make.

*Dimensions:  approx 16 inches x 8 inches wide x 9 inches. 

* Weight: approx 16 lbs

*Be sure to use this pump with 2 inch (OR Larger) Piping Only and eliminate 90degree elbows or tees, etc (one 90 degree fitting has the equivalent friction loss factor of an additional 17 feet of pipe!!)  Best is to use: 45 degree fittings OR flexible polytheylene pipe or flexible PVC pipe for "gradual" bends.   The "Golden Rule" here is that a few extra $$$ spent on piping will pay off big over the years with increased performance!!!

*Pump is also "self-priming" when used with a: Our "FULL FLOW" 2 inch check valve installed in the suction pipe.

*Large 3 inch O.D. diameter threaded ports ready to connect to standard  2 inch pvc pipe with the included Union Adapters! 

*Adjustable flow from 2,000gph all the way to 7,000gph with the addition of a 2" valve on the discharge!

*6ft: 115 volt "Plug-In" power cord

* FULL 3 year Warranty on pump head!

*Includes: Pump, set of 2 pvc Union Adapters for use with 2 inch PVC Pipe!

*Super Quiet operation! 

Optional Items available upon request with NO add'l s/h charge if sent along with your PUMP: Leaftrap aka: "priming pot" basket ($79), Intake Pipe Screen, 2" Flow control valve OR 2" full flow check valve: ($15ea)