STOCK# - TKRC8000 MFG# - TKR8000
New and unused. In the original manufacturer packaging. This ships FREE within the U.S. when using ground service. If ordering it you may add more items to your order without incurring any shipping charges if shipped within the U.S. using ground service.

Chassis: 7075 aluminum 0.16 (4mm) thick
Drive: Four wheel front and rear universal driveshafts tapered
aluminum center driveshaft
Differentials: Three fluid filled adjustable
Shocks: Oil-filled with CNC machined aluminum bleeder shock caps
that can be used to build vented or non-vented shocks (optional
bladders required for non-vented shocks) 4mm steel shafts
CNC 4×1.9 Flat/Flat Delrin Pistons and CNC Delrin Guides new low
frequency shock springs tall clamping spring perches with
captured shock boots
Steering: Revised geometry and Ackermann plate response and
durability improved with new bearing supported spindles and spindle
carriers reduced wheel offset for better performance in corners
adjustable Ackermann and bump-steer Ackermann refers to the effect
of the inner front wheel rotating faster that the outer front wheel
during turns optional solid right bell crank for increased
response
Body: Clear polycarbonate fighter jet inspired with more internal
clearance small rear spoilers increase downforce with with
adjustable low center of gravity lightweight mount
Suspension: Revised wide rear pivot suspension geometry
Motor Mount: 2-piece CNC aluminum with dual clamping gear mesh
adjustment direct-to-diff mounting
Caster: Adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle

EB48.4 Competition Buggy Kit with Clear Body Shocks Decals Window
Mask Sheet Rear Wing Shock and Diff Oil Instruction Manual

Radio: 2-channel with high-torque steering servo
Motor and ESC System: For 1/8 scale buggy
Tires and Wheels: For 1/8 scale buggy
Pinion Gear: MOD1 15-25 tooth pinion (TKR4175-TKR4185)
LiPo Battery: 4-6S (4S at least 5000mAh)
Battery Charger Charging Bag Paint CA Glue tools building and
track equipment

Vehicle-
Length: 17.1 (435mm) without wing
Width: 12 - 12.2 * (306-310mm*) *optional hubs required
Weight: 7.0lbs (3200g)
Internal Gear Ratio: 3.33:1
Diff Ratio: F/R - 12/40t center 44t
Battery Tray Dimensions: 1.97x5.8 (50x148mm) 2x2s or 1x4s config
Body-
Length: 13.3 (338mm)
Width: 5 (127mm)
Height: 3.5 (89mm)

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 5x11mm Front Gearbox 1 DTXC1547
2 5x13mm Rear Gearbox 1 ARZC1023
2 8x16mm Front Hubs 1 DTXC1585
2 13x19mm Front Hubs 1 TKRC3194
2 8x16mm Rear Hubs 1 DTXC1585
2 13x19mm Rear Hubs 1 TKRC3194
2 6x10mm Steering 1 DTXC1561
4 5x8mm Steering 2 DTXC1523

jxs 12/20/16
ir/jxs

Payments – PAYPAL IS THE ONLY PAYMENT WE ACCEPT.

International Buyers Only – Please allow 2 to 4 weeks for international deliveries. Not all international packages are shipped with tracking information. Please Note: Duties and taxes are not included in the item price or shipping charges. Please check with your local customs office prior to buying. These will be added by your local authorities upon delivery - do not confuse them for additional shipping charges. We are unable to falsify the value of the shipment because that would be illegal.

Feedback Ratings – Please contact us first if you feel that you cannot give us ratings of 5 in all categories. We make overall customer satisfaction our #1 priority and would appreciate the opportunity to earn a 5 rating.