This is a  16  PIECE SET of the MOST popular and Commonly used COMPENSATING TOPSTITCH FEET for INDUSTRIAL Single Needle Sewing Machines. We have included ALL sizes in both LEFT & RIGHT.

This set will fit INDUSTRIAL SINGLE NEEDLE Sewing Machines made by:

ARTISAN    BROTHER    CONSEW    COLUMBIA    JUKI    MITSUBISHI    NAKAJIMA    REX    SEIKO    SINGER    SIRUBA    TAIKO    TOYOTA

All feet are BRAND NEW. These feet purchased separately would cost FAR more than this SET. And you would have to go to several sources just to find them all.

Get them here in a complete set and you are READY TO SEW!

Some of the feet have factory code numbers stamped onto them instead of the Singer Part Numbers that we use in our computer. We have indicated the factory code numbers after the part numbers that we use.

FROM LEFT TO RIGHT

• 210  (CR1/32N)   This is a 1/32" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This is the smallest size topstitch for very fine work with very light fabrics.
  
  
• 211  (CR1/16)   This is a 1/16" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This is the most popular and commonly used topstitch size for apparel.
  
  
• 212  (CR1/8)   This is a 1/8" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This size can be used for heavier fabrics including Denim.
  
  
• 213  (CR3/16)   This is a 3/16" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This size is commonly used for pockets and collars.
  
  
• 214  (CR1/4)   This is a 1/4" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This is the 2ND most popular size used. It is very often used on pockets, handbags, light leathers, light vinyls, Etc.
  
  
• 215R  (CR5/16)   This is a 5/16" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. These larger sizes are hard to find so most operators must struggle with some kind of screw on topstitch guide that does not work nearly as well as a Compensating Topstitch Foot!
  
  
• 216R  (CR3/8)   This is a 3/8" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. These larger sizes are hard to find so most operators must struggle with some kind of screw on topstitch guide that does not work nearly as well as a Compensating Topstitch Foot!
  
  
• 218R  (CR1/2)   This is a 1/2" RIGHT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. These larger sizes are hard to find so most operators must struggle with some kind of screw on topstitch guide that does not work nearly as well as a Compensating Topstitch Foot!
  
  

• ---

  
  
• 220  (CL1/32)   This is a 1/32" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This is the smallest size topstitch for very fine work with very light fabrics.
  
  
• 221  (CL1/16)   This is a 1/16" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This is the most popular and commonly used topstitch size for apparel.
  
  
• 222  (CL1/8)   This is a 1/8" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This size can be used for heavier fabrics including Denim.
  
  
• 223  (CL3/16)   This is a 3/16" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This size is commonly used for pockets and collars.
  
  
• 224  (CL1/4)   This is a 1/4" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. This is the 2ND most popular size used. It is very often used on pockets, handbags, light leathers, light vinyls, Etc.
  
  
• 225L  (CL5/16)   This is a 5/16" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. These larger sizes are hard to find so most operators must struggle with some kind of screw on topstitch guide that does not work nearly as well as a Compensating Topstitch Foot!
  
  
• 226L  (CL3/8)   This is a 3/8" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. These larger sizes are hard to find so most operators must struggle with some kind of screw on topstitch guide that does not work nearly as well as a Compensating Topstitch Foot!
  
  
• 228L  (CL1/2)   This is a 1/2" LEFT Compensating Foot used for uniform and precise topstitching. These feet are called "COMPENSATING" because the edge guide is spring loaded to Compensate for different thicknesses of fabric. These larger sizes are hard to find so most operators must struggle with some kind of screw on topstitch guide that does not work nearly as well as a Compensating Topstitch Foot!

These Brand New Highest Quality Feet will fit:

ARTISAN:  196R    5550N    8500N    ZJ-100

BROTHER:   B705    B707    B715    B716    B735    B737    B738    B745    B755    B757    B758    B767    B781    PQ1300    PQ1500

COLUMBIA:   N430

CONSEW:   30    98    99    102    103    105    210    217    218    219    220    230    290    310    2230    7360R-1

CUTLINE:   C220

CUTSEW:   CS-777

GEMSY:   8700

JUKI:   DDL-127    DDL-227    DDL-500    DDL-501    DDL-552    DDL-553    DDL-555    DDL-5550    DDL-5600    DDL-8300    DDL-8500    DDL-8700    DDL-9000     TL98E    TL98Q

MITSUBISHI:   DB-120    DB-121    DB-122    DB-126    DB-130    DB-170    DB-189    DB-199    LS2-130    LS2-150    LS2-180    LS2-190    LS2-1130

NECCHI:   SUPERNOVA JULIA

RELIABLE:   MSK-8800    MSK-8550M    MSK-8870M

REX:   RX8500

RICCAR:   RD-102

SINGER:   31-15    44    95    96    120U    121C    121D    188K    191D    195K    196K    241    251    281    366K   400W    402W    451K    491D    591D    600W    660A    691D    770D    771D    2191    2491D

SUNSEW:   GC1130    GC5550    GC6180    GC8500    GC-B735    GC-C111

SUNSTAR:   KM-123A    KM-123B    KM-137A    KM-137B    KM-146BL    KM-250

TACSEW:   5550    T8700

TAIKO:   TK-505    TK-510

TOYOTA:   AD156    AD157    AD338    D146    D147    D347    D348    D1422-42    D2432

TYPICAL:   GC6-1-D3E2    GC6150B    GC6150H    GC6150M    GC6160D3    GC6195M

UNICORN:   LS2-H520    LS2-H530    LS2-H5100    LS2-H5200    LS2-H5300

YAMATA:   FY8500

This High Quality Set will also fit many Home Sewing Machines that use HIGH SHANK Presser Feet. Look at the feet in the photo to see if your feet are shaped the same way. These HIGH SHANK Presser Feet have a Total Height of 1-1/4". But LOW SHANK Presser Feet have a total Height of about 7/8". These Feet WILL NOT fit LOW SHANK Home Sewing Machines.

Never run your machine with ANY Zig Zag with these feet, ONLY Straight Stitch!

Everyone loves our 40 piece Mother of all Presser Feet set!

But many of our friends asked for more Specialized sets such as:

5 PIECE ELASTIC PRESSER FOOT SET  #ELASTIC

10 PIECE HEMMER PRESSER FOOT SET  #HEMMER

6 PIECE PIPING PRESSER FOOT SET  #PIP

4 PIECE QUILTER PRESSER FOOT SET  #QF1

14 PIECE RAISING PRESSER FOOT SET  #RF1

4 PIECE SHIRRING PRESSER FOOT SET  #SF1

10 PIECE TEFLON PRESSER FOOT SET  #TF2

16 PIECE TOPSTITCH PRESSER FOOT SET  #TS2

9 PIECE ZIPPER PRESSER FOOT SET  #ZIPPER

16 PIECE COMBINATION PRESSER FOOT SET  #IF3

25 PIECE COMBINATION PRESSER FOOT SET  #IF2

40 PIECE COMBINATION PRESSER FOOT SET  #IF

So we Built & Listed ALL of these Sets!