AWESOME Price on a BRAND NEW Brand New 500A ESC For Controlling a Brushless Motor. Commonly installed in a radio controlled airplane or helicopter This is an OPTO ESC so there is no BEC (low voltage output for a transmitter). This is a real 500 AMP Peak ESC with a large aluminum heat sink.
Measures approximately 8" x 4-3/4" x 1-1/2"
Firmware can be upgraded but you must download software elsewhere. USB link wire included.
This ESC has may adjustable function values detailed below. All values can be adjusted with a Windows based PC via USB link wire.
Automatic detection or manual operation to set up ESC to your motor
Auto cut off power within 3 seconds of no radio signal
1. Reverse: On or Off
2. Timing: 0° to 30° in any 1° increment
3. Frequency: 8KHz, 16 KHz, 32 KHz
4. Acceleration: Soft / Medium / Hard
5. Type of Battery: NiCd/NiMh, Li-Ion/Li-Pol, LiFe
6. NiCd/NiMH Cutoff Voltage: 0.05, 0.4V, 0.5V, 0.6V, 0.7V ,0.8V, 0.9V, 1.0V or 5%
7. Number of Cells: Automatic detection, or Fixed 4S, 5S, 6S, 7S, 8S, 9S, 10S, 11S, 12S, 16S, 17S, 18S, 19S, 20S, 21S, 22S
8. LiIo/Pol Cutoff Voltage:2.0V, 2.1V, 2.2V, 2.3V, 2.4V, 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V
9. LiFe Cutoff Voltage: 2.2V, 2.3V, 2.4V, 2.5V, 2.6V, 2.7V or 2.8V
10. Cut Off Type: Slow or Hard
11. Power limited forward: Off, 75%, 50%, 25%
12. Power limited reverse: Off, 75%, 50%, 25%
13. Delay time when switching direction in seconds: 0.25, 0.5, 0.75, 1, 1.5, 2, 3, or 5
14. Reverse point: Auto or fixed in miliseconds: 1.0, 1.1, 1.2, or 1.3
15. Forward point: Auto or fixed in miliseconds: 1.7, 1.8, 1.9, or 2.0
16. Throttle curve: Logarithmical, Linear, Exponential
17. Rotation direction: Left, Right
18. Timing monitor: On, Off