Mega OBD2 is a Plug&Drive Ready device to increase the performance of the engine.

Mega OBD2 is easy to install. Just plug it into the OBD2 connector of your car. Mega OBD2 fits all car from the year of 1997 and is easy to plug and fit yourself within a couple of minutes.

It works based on OBD2 protocols as remapping the Car's computer ECU. After driving 150 miles in total, Mega OBD2 adjusts itself to the car.

According to the drivers' habits it always keeps remapping the ECU to increase the performance of engine.

How does Mega OBD2 Chip Tuning Box work?

When it's plugged into the OBD2 connector, Mega OBD2 receives the information from the car's computer ECU.

Mega OBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.

Mega OBD2 Chip Tuning Box does not exceed the manufacturers required parameters. It works only within the tolerance of the engine so is 100% safe to use.

Mega OBD2 finds out the hidden power of your car. Mega OBD2 does not damage the engine/ECU or cause any negative effects to the car factory setting.

Mega OBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug Mega OBD2 from the OBD2 connector.
 

Mega OBD2 is produced on the printed circuit board in SMD technology and are of very high quality.

Installation and Calibration

1 - Pull the Car Key out from the ignition.

2 - Find OBD2 connector(*) in your car and Plug in Mega OBD2

3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 - Press the reset button on the Tuning Chip for about 5 sec. After releasing the button wait for a while about 30-54 sec. (Mega OBD2 will communicate and establish connection with ECU)

5 - Start up the engine.

6 - Mega OBD2 will recognize your vehicle and your driving habits, after around 150 miles of driving Mega OBD2 will adjust itself to match your car perfectly for more performance & fuel saving.

Where is the OBD2 connector in your car?

1 Driver's side, underneath dashboard, in the area under the steering

column.

2 Driver's side, underneath dashboard,between the driver-side door and steering column area.

3 Driver's side, underneath dashboard, between the steering column area and the center console.

4 Driver's side, dashboard instrument/gauge area, between the steering column and center console.

5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column

6 Center console, vertical surface  left of vehicle center line.

7 Center console, vertical surface right of vehicle center line or on passenger side of center console.

8 Center console, horizontal surface  in front passenger area.

Package List :

- Mega OBD2 Chip Tuning Box Interface

- Box